A.#3 for the trinity
B.#7 God's perfect number
C.#33 for stone that the builders refused
D.name your own
If Jesus played pro sports, what number would he wear?
#666
Reply:The lord already plays pro sports. Kaka's number is 22.
Reply:7
Tuesday, July 14, 2009
Priming before painting?
I have had 3 people come out to give me a quote. All 3 have stated I do not need primer (the walls are the icky eggshell/ivory/off-white builders love).One said b/c there were some grease stains and crayon marks from the previous owner, only those areas need to have Kilz on it. They all will do any wall repair needed. 1st quote is $1000 on about 1300sq ft w/ a 2 story foyer... the others I'm waiting on their proposals...
I thought you had to prime?
Priming before painting?
Priming can be used to seal a wall, like from grease or something, or to cover up a dark color. If you choose a dark color for paint, you should use a tinted primer so you don't have to use as many coats.
Reply:It sounds like an inside job to me.
Give the walls a good cleaning with sugar soap. With the cleaning products at the supermarket.
The price sounds reasonable to me, if it includes the paint, scaffolding, drop cloths masking etc.
If they are professionals they will stand by their work.
Watch out for "cowboys" or "fly by night amateurs.
Some words of advice.
Would you ask the baker about banking ?
Would you ask the banker about baking ?
Think about that.
Reply:You've received some great answers. I've been a do-it-yourselfer for many years. I don't prime unless I have to. If you're painting over recently painted walls that are clean then you don't need primer. Older paint, a very dark color, or paint you're not sure if it's oil or latex-based, then a good primer would be recommended.
I use Magic Eraser, great product. Also goo-gone is wonderful. Clean after using these products before painting to remove any residue.
And do try it yourself. Cover up the floors, tape off any woodwork, move furniture out of the way. Wear grungy clothes you dont' care about, and have fun! I love to paint, it's a great catharsis. Oh, and for your two-story foyer, a paint stick and a painting pad to do edges are great. The paint pad/edger has these little wheels on it that allows you to get very close to molding/ceilings without getting paint on the molding as long as you watch and make sure no paint in on the wheels. (This is why I don't usually tape anything off, but for a newbie, tape is recommended)
Good luck, and have fun!
Reply:u should prime it helps alot
i paint my own house and always prime my frfiend once didnt and it lookedl ike crapt
Reply:you have had 3 professional painters come over and tell you , that it is not necissary to prime , however you are going to listen to yahoo users instead? trying to see the logic in that. aside from that they are correct you do not need to prime, only over the marks, i would clean off the grease and then prime lightly sand it, if at all, then paint the wall
Reply:Priming is not necessary when painting over existing paint unless there are grease spots as you pointed out or unless the color on the wall is dark and you are wanting to go lighter - which is not the case in your situation. However, I always prime when painting a bathroom area because of the moisture. The primer makes the paint adhere better. Another instance where primer can actually save you money is if you are painting new drywall or if the paint on the wall already is a cheap flat paint. The primer can make you have to use less of the more expensive custom color you are putting on the wall. If you really want to save money - I would consider doing it yourself. Painting is not difficult and it can be really rewarding in the end. My husband and I recently helped my daughter paint the entire inside of her newly constructed home and she saved over $8000! It only took us a little more than two weekends to do it.
Reply:You usually only need to prime if you are painting new drywall or plaster. Most grease and crayon stains can be removed or lightened with Mr. Clean magic eraser, so further coverage may not be necessary. You can continue to use magic eraser to keep your walls clean. I use mine constantly in the high traffic areas, and it works really well.
I thought you had to prime?
Priming before painting?
Priming can be used to seal a wall, like from grease or something, or to cover up a dark color. If you choose a dark color for paint, you should use a tinted primer so you don't have to use as many coats.
Reply:It sounds like an inside job to me.
Give the walls a good cleaning with sugar soap. With the cleaning products at the supermarket.
The price sounds reasonable to me, if it includes the paint, scaffolding, drop cloths masking etc.
If they are professionals they will stand by their work.
Watch out for "cowboys" or "fly by night amateurs.
Some words of advice.
Would you ask the baker about banking ?
Would you ask the banker about baking ?
Think about that.
Reply:You've received some great answers. I've been a do-it-yourselfer for many years. I don't prime unless I have to. If you're painting over recently painted walls that are clean then you don't need primer. Older paint, a very dark color, or paint you're not sure if it's oil or latex-based, then a good primer would be recommended.
I use Magic Eraser, great product. Also goo-gone is wonderful. Clean after using these products before painting to remove any residue.
And do try it yourself. Cover up the floors, tape off any woodwork, move furniture out of the way. Wear grungy clothes you dont' care about, and have fun! I love to paint, it's a great catharsis. Oh, and for your two-story foyer, a paint stick and a painting pad to do edges are great. The paint pad/edger has these little wheels on it that allows you to get very close to molding/ceilings without getting paint on the molding as long as you watch and make sure no paint in on the wheels. (This is why I don't usually tape anything off, but for a newbie, tape is recommended)
Good luck, and have fun!
Reply:u should prime it helps alot
i paint my own house and always prime my frfiend once didnt and it lookedl ike crapt
Reply:you have had 3 professional painters come over and tell you , that it is not necissary to prime , however you are going to listen to yahoo users instead? trying to see the logic in that. aside from that they are correct you do not need to prime, only over the marks, i would clean off the grease and then prime lightly sand it, if at all, then paint the wall
Reply:Priming is not necessary when painting over existing paint unless there are grease spots as you pointed out or unless the color on the wall is dark and you are wanting to go lighter - which is not the case in your situation. However, I always prime when painting a bathroom area because of the moisture. The primer makes the paint adhere better. Another instance where primer can actually save you money is if you are painting new drywall or if the paint on the wall already is a cheap flat paint. The primer can make you have to use less of the more expensive custom color you are putting on the wall. If you really want to save money - I would consider doing it yourself. Painting is not difficult and it can be really rewarding in the end. My husband and I recently helped my daughter paint the entire inside of her newly constructed home and she saved over $8000! It only took us a little more than two weekends to do it.
Reply:You usually only need to prime if you are painting new drywall or plaster. Most grease and crayon stains can be removed or lightened with Mr. Clean magic eraser, so further coverage may not be necessary. You can continue to use magic eraser to keep your walls clean. I use mine constantly in the high traffic areas, and it works really well.
English help?
Question 4 of 10
Multiple Choice: Please select the best answer and click "submit."
Which of the following uses hyphenation correctly?
A. The blue mood-ring hung around her neck on a chain.
B. The traditional home builder rejects materials like fibreglass and aluminium.
C. The Belgian chocolate maker trained in New York.
D. The tinted glass installer closed up shop for the day.
English help?
A
Reply:um there's only one hyphen, take a wild guess.
Reply:A. is the only sentence that uses a hyphen????
floral arrangements
Multiple Choice: Please select the best answer and click "submit."
Which of the following uses hyphenation correctly?
A. The blue mood-ring hung around her neck on a chain.
B. The traditional home builder rejects materials like fibreglass and aluminium.
C. The Belgian chocolate maker trained in New York.
D. The tinted glass installer closed up shop for the day.
English help?
A
Reply:um there's only one hyphen, take a wild guess.
Reply:A. is the only sentence that uses a hyphen????
floral arrangements
ATHEISTS: a test for you?
1. Do you know of any building that didn't have a builder?
___ YES ___ NO
2. Do you know of any painting that didn't have a painter?
___ YES ___ NO
3. Do you know of any car that didn't have a maker?
___ YES ___ NO
4. The man who sees a building and doesn't know if there was a builder is:
___ A. Intelligent
___ B. A fool
___ C. Has an ulterior motive for denying the obvious
ATHEISTS: a test for you?
Hehehe.. Look at 'em writhe. You're my hero for the day. ;)
Reply:Why do christians fail to distinguish between natural objects and manmade objects? Again, you still haven't demonstrated where I can go to get someone to make me a tree. Report It
Reply:People inhabited caves for years. Lived in them just like they do in buildings. You could easily consider them buildings without a builder. Happy now? Expand your mind.
Painting: ever see the inside of a geode? The Painted Desert out in the Western US? Expand your thinking.
Many things look made but have no maker. Look at Quartz Crystals.
The person who thinks that since people make things, that therefore EVERYTHING must have a maker who is a person is just plain narrow minded.
Reply:1. No.
2. No.
3. No.
4. D. Unable to distinguish between the man made and the natural.
Do I get an A?
Reply:1. No. Buildings, by definition, are man-made. Pretty self-explanatory.
2. No. Again, paintings (and paint) are specifically products of mankind.
3. No. Here again, we see another product that is demonstrably created my people. I'm beginning to see a trend here with your illogic.
4. B.
That was easy!
How'd I do??
Reply:No
No
No
B
Now, a test for you
1. Do you know of anywhere where you can get a career in tree building?
___YES___NO
2. Do you know any rock making careers?
___YES___NO
3. Do you know of any cloud making careers?
___YES___NO
4. A man who doesn't know the difference between a man made object and a natural object is
___ A. Intelligent
___ B. A fool
___ C. Has an ulterior motive for denying the obvious
Reply:Except buildings and paintings don't reproduce to make slightly different buildings and paintings, and in your little story you omit to mention what made the builder and the painter?
Reply:Lemme guess.. GODDIDIT!!!
What I win?? Huh HUh, tell me what I win???!!!!11
Reply:Your silly "test" is merely a variation of what is called the "argument by design." It is even more meaningless today than it was when first proposed by St. Thomas Aquinas, in the thirteenth century.
All living things are capable of spontaneous self-assembly, with the overall design being encoded in each cell's DNA. Neither, buildings, nor paintings, nor automobiles are capable of self-assembly, so your argument is completely meaningless.
Before you stick your neck out again, I suggest you study St. Thomas Aquinas' six "proofs" of God's existence. They've all been discredited long ago and most experienced atheists know them by heart.
Reply:That kind of logic perpetuated the thinking that the world is flat.
Reply:1. Not just one singular builder but many, many specialists.
2. Many paintings, many painters
3. Again, specialization and division of labor
4. Probably a critical thinker.
So your argument is from complexity, no? There is no "Watchmaker" just so you know. It's an assembly line, with no singular creator.
And who created your creator? There goes your argument. Clearly not everything needs a creator.
Reply:Another example of faulty logic and a total lack of knowledge of history, science, the scientific process, and the rules of evidence. Go get a real University Education and come back to see us.
Reply:by your argument your god must also have builder/painter/maker
Either everything requires a creator or not everything requires a creator
if everything requires a creator then so does your god
if not everything requires a creator then why does the universe.
Either way it's a stupid argument
Reply:People made those things. You can see people making those things. Have you ever seen god do anything? I sure haven't.
Reply:Just silly.
Reply:lol
its funny how hard you guys to make a case for the ludicrous. Do you still think the earth is flat as well?
Reply:Wow we are scraping the bottom of the barrels bottom aren't we?
Do you have any evidence whatsoever for the existence of your God? (The Earth, Bible or friend of a friend stories don't count)
Reply:Atheists believe that buildings were built by builders, paintings were painted by painters, and cars were made by car makers.
What's your point?
---------------------------
Doncha just love how thoroughly this creationist screwed up? I think this one was hilarious.
Reply:Are you trying to equate the complex evolution of life with the 'simple' construction of inanimate objects?
I AM NOT A BUILDING!!!
An atheist
___ YES ___ NO
2. Do you know of any painting that didn't have a painter?
___ YES ___ NO
3. Do you know of any car that didn't have a maker?
___ YES ___ NO
4. The man who sees a building and doesn't know if there was a builder is:
___ A. Intelligent
___ B. A fool
___ C. Has an ulterior motive for denying the obvious
ATHEISTS: a test for you?
Hehehe.. Look at 'em writhe. You're my hero for the day. ;)
Reply:Why do christians fail to distinguish between natural objects and manmade objects? Again, you still haven't demonstrated where I can go to get someone to make me a tree. Report It
Reply:People inhabited caves for years. Lived in them just like they do in buildings. You could easily consider them buildings without a builder. Happy now? Expand your mind.
Painting: ever see the inside of a geode? The Painted Desert out in the Western US? Expand your thinking.
Many things look made but have no maker. Look at Quartz Crystals.
The person who thinks that since people make things, that therefore EVERYTHING must have a maker who is a person is just plain narrow minded.
Reply:1. No.
2. No.
3. No.
4. D. Unable to distinguish between the man made and the natural.
Do I get an A?
Reply:1. No. Buildings, by definition, are man-made. Pretty self-explanatory.
2. No. Again, paintings (and paint) are specifically products of mankind.
3. No. Here again, we see another product that is demonstrably created my people. I'm beginning to see a trend here with your illogic.
4. B.
That was easy!
How'd I do??
Reply:No
No
No
B
Now, a test for you
1. Do you know of anywhere where you can get a career in tree building?
___YES___NO
2. Do you know any rock making careers?
___YES___NO
3. Do you know of any cloud making careers?
___YES___NO
4. A man who doesn't know the difference between a man made object and a natural object is
___ A. Intelligent
___ B. A fool
___ C. Has an ulterior motive for denying the obvious
Reply:Except buildings and paintings don't reproduce to make slightly different buildings and paintings, and in your little story you omit to mention what made the builder and the painter?
Reply:Lemme guess.. GODDIDIT!!!
What I win?? Huh HUh, tell me what I win???!!!!11
Reply:Your silly "test" is merely a variation of what is called the "argument by design." It is even more meaningless today than it was when first proposed by St. Thomas Aquinas, in the thirteenth century.
All living things are capable of spontaneous self-assembly, with the overall design being encoded in each cell's DNA. Neither, buildings, nor paintings, nor automobiles are capable of self-assembly, so your argument is completely meaningless.
Before you stick your neck out again, I suggest you study St. Thomas Aquinas' six "proofs" of God's existence. They've all been discredited long ago and most experienced atheists know them by heart.
Reply:That kind of logic perpetuated the thinking that the world is flat.
Reply:1. Not just one singular builder but many, many specialists.
2. Many paintings, many painters
3. Again, specialization and division of labor
4. Probably a critical thinker.
So your argument is from complexity, no? There is no "Watchmaker" just so you know. It's an assembly line, with no singular creator.
And who created your creator? There goes your argument. Clearly not everything needs a creator.
Reply:Another example of faulty logic and a total lack of knowledge of history, science, the scientific process, and the rules of evidence. Go get a real University Education and come back to see us.
Reply:by your argument your god must also have builder/painter/maker
Either everything requires a creator or not everything requires a creator
if everything requires a creator then so does your god
if not everything requires a creator then why does the universe.
Either way it's a stupid argument
Reply:People made those things. You can see people making those things. Have you ever seen god do anything? I sure haven't.
Reply:Just silly.
Reply:lol
its funny how hard you guys to make a case for the ludicrous. Do you still think the earth is flat as well?
Reply:Wow we are scraping the bottom of the barrels bottom aren't we?
Do you have any evidence whatsoever for the existence of your God? (The Earth, Bible or friend of a friend stories don't count)
Reply:Atheists believe that buildings were built by builders, paintings were painted by painters, and cars were made by car makers.
What's your point?
---------------------------
Doncha just love how thoroughly this creationist screwed up? I think this one was hilarious.
Reply:Are you trying to equate the complex evolution of life with the 'simple' construction of inanimate objects?
I AM NOT A BUILDING!!!
An atheist
Algebra Help!!!?
Using the addition property of equality solve each equation. Be sure to check your answers.
1. y - 3 = -17
2. -5 + y = -19
3. r + (3/5) = -( 7/10 )
4. x + 10.6 = -9
5. 13 - 3r + 2 + 6r - 2r - 2r - 1 = 3 + 2*8
6. 4r - 3 = 5 + 3r
--------------------------------------...
Solve each equation. Be sure to check your answers.
1. 6x = 18
2. -6r = 3
3. (-5/8) x = -25
4. 12 - 18 = 12y - 6y - 3y
5. 8r = 3r - 10
6. (3/4)x - (2/3) = (7/12)
--------------------------------------...
Solve each equation. Be sure to check your answers.
1. 2x - 8x + 35 = 5 - 3x
2. 2 ( x + 2 ) = -4x - 2
3. 7 ( 3m - 2) + 5 = 6 ( 2m - 1) + 24
4. -2 ( x - 4) - ( 3x - 2) = -2 - (6x - 2)
5. 17.3 - 2.7x = 10.55
--------------------------------------...
The equation 4x + 6 = 2 (x+3) + 2x is satisfied regardless of what real number is substituted for x. Substitute a few real numbers and then try solving the equation. Describe what happens.
--------------------------------------...
What is 16% of 90?
--------------------------------------...
Put the following equation in terms of y. (For instance y+x = 2 converts to y = 2-x). Substitute the value for x into the equation to solve for y:
1. 2x + 6y = -12; x = -2
2. 2x - 5y = -10; x = 0
--------------------------------------...
Determine whether each number is a solution of the given equality.
1. x %26lt; -6 a. 6 b. -13 c. -6.7
2. -4x + 3 %26gt;= 23 a. -5 b. 0 c. -9
--------------------------------------...
Describe the graph using set-builder notation
%26lt;*************************************...
-10 -9 -8 -7 -6 -5 -4 -3 -2
--------------------------------------...
Use the multiplication properties of inequality to solve the following problems. Graph the solution sets.
1. -7x %26gt; 21
2. -7x %26lt; -21
--------------------------------------...
Use the multiplication and addition properties to solve the following problems. Graph the solution sets.
1. 4 ( 2y - 1) %26gt; 12
--------------------------------------...
The product of 8 and a number, decreased by 14, is 218. Find the number.
--------------------------------------...
Maria is working with a realtor whose commission is 10% of the selling price of her house. If she wants to get $72,000 to pay off her mortgage, what should be the selling price?
--------------------------------------...
Given that my number is greater than 16 and less than 19. Given that your number is greater than 12 and less than 20. Therefore, our numbers could be the same. Is this a valid or invalid statement?
--------------------------------------...
Solve for x: (-3/8) = (6/x)
--------------------------------------...
Which one of the following is true?
a. A statement that two proportions are equal is called a ratio.
b. The ratio of 1.25 to 2 is equal to the ratio 5:8.
c. The ratio of a 12-inch plant to a 4-foot plant is 3:1.
d. If 30 people out of 70 are men, then the ratio of women to men is 40:100.
--------------------------------------...
The measure of the angle's supplement is 52 degrees more than twice that of its comlpement. What is the angle?
--------------------------------------...
A sailboat has a triangular sail whose area is 221 square meters. If the sail's base is 26 meters, what is its height?
Algebra Help!!!?
don't be so freakin lazy
Reply:hmmm.... the answer is: do your homework.
Reply:its not that hard.. yu dunt have to post everything on yahoo.. ill help yu out with number 1:
1. y - 3 = -17
+3 + 3
____________
y= -15
Reply:All of the answers are right here in some form, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0
Reply:do your homework or else you won't ever learn how to do yourself.
1. y - 3 = -17
2. -5 + y = -19
3. r + (3/5) = -( 7/10 )
4. x + 10.6 = -9
5. 13 - 3r + 2 + 6r - 2r - 2r - 1 = 3 + 2*8
6. 4r - 3 = 5 + 3r
--------------------------------------...
Solve each equation. Be sure to check your answers.
1. 6x = 18
2. -6r = 3
3. (-5/8) x = -25
4. 12 - 18 = 12y - 6y - 3y
5. 8r = 3r - 10
6. (3/4)x - (2/3) = (7/12)
--------------------------------------...
Solve each equation. Be sure to check your answers.
1. 2x - 8x + 35 = 5 - 3x
2. 2 ( x + 2 ) = -4x - 2
3. 7 ( 3m - 2) + 5 = 6 ( 2m - 1) + 24
4. -2 ( x - 4) - ( 3x - 2) = -2 - (6x - 2)
5. 17.3 - 2.7x = 10.55
--------------------------------------...
The equation 4x + 6 = 2 (x+3) + 2x is satisfied regardless of what real number is substituted for x. Substitute a few real numbers and then try solving the equation. Describe what happens.
--------------------------------------...
What is 16% of 90?
--------------------------------------...
Put the following equation in terms of y. (For instance y+x = 2 converts to y = 2-x). Substitute the value for x into the equation to solve for y:
1. 2x + 6y = -12; x = -2
2. 2x - 5y = -10; x = 0
--------------------------------------...
Determine whether each number is a solution of the given equality.
1. x %26lt; -6 a. 6 b. -13 c. -6.7
2. -4x + 3 %26gt;= 23 a. -5 b. 0 c. -9
--------------------------------------...
Describe the graph using set-builder notation
%26lt;*************************************...
-10 -9 -8 -7 -6 -5 -4 -3 -2
--------------------------------------...
Use the multiplication properties of inequality to solve the following problems. Graph the solution sets.
1. -7x %26gt; 21
2. -7x %26lt; -21
--------------------------------------...
Use the multiplication and addition properties to solve the following problems. Graph the solution sets.
1. 4 ( 2y - 1) %26gt; 12
--------------------------------------...
The product of 8 and a number, decreased by 14, is 218. Find the number.
--------------------------------------...
Maria is working with a realtor whose commission is 10% of the selling price of her house. If she wants to get $72,000 to pay off her mortgage, what should be the selling price?
--------------------------------------...
Given that my number is greater than 16 and less than 19. Given that your number is greater than 12 and less than 20. Therefore, our numbers could be the same. Is this a valid or invalid statement?
--------------------------------------...
Solve for x: (-3/8) = (6/x)
--------------------------------------...
Which one of the following is true?
a. A statement that two proportions are equal is called a ratio.
b. The ratio of 1.25 to 2 is equal to the ratio 5:8.
c. The ratio of a 12-inch plant to a 4-foot plant is 3:1.
d. If 30 people out of 70 are men, then the ratio of women to men is 40:100.
--------------------------------------...
The measure of the angle's supplement is 52 degrees more than twice that of its comlpement. What is the angle?
--------------------------------------...
A sailboat has a triangular sail whose area is 221 square meters. If the sail's base is 26 meters, what is its height?
Algebra Help!!!?
don't be so freakin lazy
Reply:hmmm.... the answer is: do your homework.
Reply:its not that hard.. yu dunt have to post everything on yahoo.. ill help yu out with number 1:
1. y - 3 = -17
+3 + 3
____________
y= -15
Reply:All of the answers are right here in some form, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0
Reply:do your homework or else you won't ever learn how to do yourself.
Should we reclassify what it is to be human?
I live in a large cultural desert called Grimsby in the U.K. and am finding myself resorting to checking for the opposable thumb on people who I deal with in my job to make sure they are not just shaved apes, however it seems these apes do posess opposable thumbs, but have social skills and an ability to learn that makes chimps seem positively superior.
Should we reclassify these apes as a different species (even though they can interbreed with humans) and put them to work in medical research (as subjects not researchers), in circuses as cheep entertainment, or train them to do all the simple, menial, low paid jobs that we hate?
It seems that many of them are in simple, highly paid jobs, such as elictricians, builders, plumbers, E.T.C.
Should we reclassify what it is to be human?
I know exactly what you mean... I've thought that some people are just not human because they are so stupid... but we can't reclassify them.. we need to just put them to good use doing jobs the rest of us don't want to do... like maybe they don't have brains but they have brawn, or maybe beauty. Who knows... either way, maybe they have some redeeming quality which is useful.
Should we reclassify these apes as a different species (even though they can interbreed with humans) and put them to work in medical research (as subjects not researchers), in circuses as cheep entertainment, or train them to do all the simple, menial, low paid jobs that we hate?
It seems that many of them are in simple, highly paid jobs, such as elictricians, builders, plumbers, E.T.C.
Should we reclassify what it is to be human?
I know exactly what you mean... I've thought that some people are just not human because they are so stupid... but we can't reclassify them.. we need to just put them to good use doing jobs the rest of us don't want to do... like maybe they don't have brains but they have brawn, or maybe beauty. Who knows... either way, maybe they have some redeeming quality which is useful.
What is it about Planet Fitness's rules?
I currently work out at a Planet Fitness. When I joined I noticed there rules included no grunting and no dropping weights. Why is that? It's a gym.....the hard core body builders sometimes grunt b/c they're lifting so much weight, it's a natural thing.
It doesn't bother me either whether someone grunts or drops a weight, I understand why.
Just curious though if anyone knows why that rule is in place.
What is it about Planet Fitness's rules?
Yea, I would never join that place because of stupid rules like that. I just read in the news about a guy who had his membership revoked and was escorted out of a Planet Fitness because of his grunting.
Granted, there are extreme examples out there where people are only trying to draw attention to themselves, but when I'm truly going all out max exertion and intensity, I can't help but to make noise. Also, it's hard to help dropping 130lb dumbells after an exhausting set of incline bench press, I try to control it but that's dang hard.
I always try to be considerate of my noise levels and try to prevent dropping of weights as much as possible. I can uderstand it in regards to those folks who are just seeking attention (hey everyone, look at how much weight I'm lifting and how hard I'm working!) or those guys who slam the weights down after a set as sortof and exclamation point, but some normal occasional grunting helps.
birthday flowers
It doesn't bother me either whether someone grunts or drops a weight, I understand why.
Just curious though if anyone knows why that rule is in place.
What is it about Planet Fitness's rules?
Yea, I would never join that place because of stupid rules like that. I just read in the news about a guy who had his membership revoked and was escorted out of a Planet Fitness because of his grunting.
Granted, there are extreme examples out there where people are only trying to draw attention to themselves, but when I'm truly going all out max exertion and intensity, I can't help but to make noise. Also, it's hard to help dropping 130lb dumbells after an exhausting set of incline bench press, I try to control it but that's dang hard.
I always try to be considerate of my noise levels and try to prevent dropping of weights as much as possible. I can uderstand it in regards to those folks who are just seeking attention (hey everyone, look at how much weight I'm lifting and how hard I'm working!) or those guys who slam the weights down after a set as sortof and exclamation point, but some normal occasional grunting helps.
birthday flowers
More questions?
5. The best fluid to support physical activity for noncompetitive, everyday active people is:
a. plain, cool water
b. saltwater mixtures
c. sports drinks
d. coffee
6. Which of the following groups have the lowest protein needs?
a. body builders
b. endurance athletes
c. sedentary people
d. all need the same amount of protein
7. Iron supplements are needed when athletes:
a. feel tired after exercise
b. have sports anemia
c. have iron-deficiency anemia
d. a and c
8. Characteristics of the best diet for fitness includes all of the following except:
a. high in carbohydrates
b. based on whole foods
c. adequate in protein
d. high in fat
More questions?
5a
when you exercise you sweat a lot, so you need compensation of water
6c
muscles are mostly made of proteins, so every people that exercise hard need a lot of proteins in their nutrition
7c
8d
Reply:huh
a. plain, cool water
b. saltwater mixtures
c. sports drinks
d. coffee
6. Which of the following groups have the lowest protein needs?
a. body builders
b. endurance athletes
c. sedentary people
d. all need the same amount of protein
7. Iron supplements are needed when athletes:
a. feel tired after exercise
b. have sports anemia
c. have iron-deficiency anemia
d. a and c
8. Characteristics of the best diet for fitness includes all of the following except:
a. high in carbohydrates
b. based on whole foods
c. adequate in protein
d. high in fat
More questions?
5a
when you exercise you sweat a lot, so you need compensation of water
6c
muscles are mostly made of proteins, so every people that exercise hard need a lot of proteins in their nutrition
7c
8d
Reply:huh
HELP on steroids?
I want to no if boldenone will be a good mass builder when taken with Testex C....... any info about any of these steroids will help
HELP on steroids?
Equipoise (Boldenone Undeclynate), or "EQ" is one of the most widely used compounds by athletes today. Even though it is a veterinary steroid, the quality of production is quite high due to its use in rather expensive animals. It is one of the safest and most effective steroids used today, by athletes, power lifters and bodybuilders. It can effect slow and continuous muscle mass and strength gains over a prolonged period, and generally cycles with this drug tend to be quite long because of this fact.
Gains on a cutting cycle including Eq tend to be high quality lean mass, while bulking cycle gains with Eq aren't as "clean" but still have a very nice quality about them. This could be due to Eq's resistance to being converted to Estrogen, as well as DHT (technically, it converts to Dihydroboldenone).
It is compared to Deca-Durobolin or better than, and from personal experience, Deca is a great mass builder. I think they'll go nicely together.
Testex, or Test. PROP/ENENTH/CYPIO combinations have a great effect on promoting protein synthesis, as well as creating a positive nitrogen balance. It is an appetite stimulant and improves the conversion of proteins. In laboratory tests, it has been demonstrated that testosterone combination increase protein and decreases fat deposition. It has proven to be an excellent product for promoting size and strength in the presence of adequate protein and calories, promotes body tissue building processes, and can reverse catabolism. Just get your dose and length of time right before commencing.
Reply:You appear to be a woman, so why would you want to take steroids? Please do not be offended by my answer, but please read on.
Steroids are indeed anabolic, meaning that they help build and retain muscle tissue. But they also cause other changes, especially concerning to a woman. They cause your body hair to grow, your skin coursen, your voice deepen, and cause your genitalia to change in weird ways. And not all of these changes reverse themselves after you stop the steroid use.
Another problem is that Steroids are linked with heart disease. I had a schoolmate that was pushing to be a professional football player. He got very big VERY fast, so I know he was using steroids. He got injured so he never achieved his dream. But several years later, working as a football coach, he had a heart attack and died at age 32.
Steroids are not benign, please understand that. I am not preaching to you, only informing you. What you do with your life is your choice, and I wish you the best.
Reply:Ask your Dr. about their interaction on your body, because everyones body is different. The Dr. might suggest a blood test now to see how your system is functioning.
Reply:first off, supplementing with steroids is very dangerous.
I think your a woman and steroids in woman can cause you to look like a man, getting manly features beacuse you produce too much testosterone. And your sex drive won't be the same. All steroids have this side effect, none have zero side effects.
HELP on steroids?
Equipoise (Boldenone Undeclynate), or "EQ" is one of the most widely used compounds by athletes today. Even though it is a veterinary steroid, the quality of production is quite high due to its use in rather expensive animals. It is one of the safest and most effective steroids used today, by athletes, power lifters and bodybuilders. It can effect slow and continuous muscle mass and strength gains over a prolonged period, and generally cycles with this drug tend to be quite long because of this fact.
Gains on a cutting cycle including Eq tend to be high quality lean mass, while bulking cycle gains with Eq aren't as "clean" but still have a very nice quality about them. This could be due to Eq's resistance to being converted to Estrogen, as well as DHT (technically, it converts to Dihydroboldenone).
It is compared to Deca-Durobolin or better than, and from personal experience, Deca is a great mass builder. I think they'll go nicely together.
Testex, or Test. PROP/ENENTH/CYPIO combinations have a great effect on promoting protein synthesis, as well as creating a positive nitrogen balance. It is an appetite stimulant and improves the conversion of proteins. In laboratory tests, it has been demonstrated that testosterone combination increase protein and decreases fat deposition. It has proven to be an excellent product for promoting size and strength in the presence of adequate protein and calories, promotes body tissue building processes, and can reverse catabolism. Just get your dose and length of time right before commencing.
Reply:You appear to be a woman, so why would you want to take steroids? Please do not be offended by my answer, but please read on.
Steroids are indeed anabolic, meaning that they help build and retain muscle tissue. But they also cause other changes, especially concerning to a woman. They cause your body hair to grow, your skin coursen, your voice deepen, and cause your genitalia to change in weird ways. And not all of these changes reverse themselves after you stop the steroid use.
Another problem is that Steroids are linked with heart disease. I had a schoolmate that was pushing to be a professional football player. He got very big VERY fast, so I know he was using steroids. He got injured so he never achieved his dream. But several years later, working as a football coach, he had a heart attack and died at age 32.
Steroids are not benign, please understand that. I am not preaching to you, only informing you. What you do with your life is your choice, and I wish you the best.
Reply:Ask your Dr. about their interaction on your body, because everyones body is different. The Dr. might suggest a blood test now to see how your system is functioning.
Reply:first off, supplementing with steroids is very dangerous.
I think your a woman and steroids in woman can cause you to look like a man, getting manly features beacuse you produce too much testosterone. And your sex drive won't be the same. All steroids have this side effect, none have zero side effects.
A question for the ladies?
ok how important are muscles to u??
would u prefer
a. big body builder
b. normal figure dude
c. skinny/scronny dude
yep pretty much it
A question for the ladies?
Personally, this isn't that important to me. Muscles are nice, but I look at a person's face/hair/clothes more when judging physical appearance.
i.e., You could be in crazy body builder shape but if you have an ugly face and a mullet you can forget it. On the flip side, if you are attractive and know how to dress but are a skinny dude (or a few lbs overweight), that would be fine with me.
Most of all you have to be funny, kind, confident and charming.
Reply:d. a guy with meat on his bones (love big guys!) %26lt;3
Reply:B.
but jon its ok if ur weak and scrawny
u cant help it right??
haha jk =,)
Reply:b for sure.
Reply:b. normal figure dude
Reply:i usually go for c (unintentionally 4 out of the 5 guys i've dated have weighed no more than 130), but i'm perfectly fine with b as well. i'm not big on the buff type at all.
Reply:Just a nicely toned body is fine.
Reply:Built, but not like a bodybuilder.... I think that's a bit of a turn-off. All of those huge muscles gross me out, lol. I'm not putting down those who chose such a profession; I'm just saying my preference.
If a guy has abs and guns, it's super hot. But not too extreme :)
Reply:deffinetly a normal figure.
because a body builder is to bulky for me
and a skinny dude
is way to blaaah for me
Reply:b
Reply:b
answer mine
http://answers.yahoo.com/question/index?...
Reply:b.
Reply:B with maybe a little bit of A, but B is all good =]
Reply:I'd prefer B.
As long as he doesn't have a beer belly, and he has some muscle, I'm happy...
Reply:normal figure
Reply:b for sure.
Reply:B!!!!!
would u prefer
a. big body builder
b. normal figure dude
c. skinny/scronny dude
yep pretty much it
A question for the ladies?
Personally, this isn't that important to me. Muscles are nice, but I look at a person's face/hair/clothes more when judging physical appearance.
i.e., You could be in crazy body builder shape but if you have an ugly face and a mullet you can forget it. On the flip side, if you are attractive and know how to dress but are a skinny dude (or a few lbs overweight), that would be fine with me.
Most of all you have to be funny, kind, confident and charming.
Reply:d. a guy with meat on his bones (love big guys!) %26lt;3
Reply:B.
but jon its ok if ur weak and scrawny
u cant help it right??
haha jk =,)
Reply:b for sure.
Reply:b. normal figure dude
Reply:i usually go for c (unintentionally 4 out of the 5 guys i've dated have weighed no more than 130), but i'm perfectly fine with b as well. i'm not big on the buff type at all.
Reply:Just a nicely toned body is fine.
Reply:Built, but not like a bodybuilder.... I think that's a bit of a turn-off. All of those huge muscles gross me out, lol. I'm not putting down those who chose such a profession; I'm just saying my preference.
If a guy has abs and guns, it's super hot. But not too extreme :)
Reply:deffinetly a normal figure.
because a body builder is to bulky for me
and a skinny dude
is way to blaaah for me
Reply:b
Reply:b
answer mine
http://answers.yahoo.com/question/index?...
Reply:b.
Reply:B with maybe a little bit of A, but B is all good =]
Reply:I'd prefer B.
As long as he doesn't have a beer belly, and he has some muscle, I'm happy...
Reply:normal figure
Reply:b for sure.
Reply:B!!!!!
Is it possible to refinance 1st & 2nd mortgages for a brand new house immediately after I close?
I am required to use my builder's mortgage company b/c they are giving me incentives but the rates are 0.5% higher than other lendes on both the 1st and 2nd mortgages.
I am wondering if I would be able to refinance both mortgages immediately after I close? What do I need to consider? What questions do I need to ask?
Sale Price: $960k
New House in California
Interest Rates for 1st/2nd mortgages: 6.75%/8.675%
Excellent FICO scores - high 700s to low 800s
Is it possible to refinance 1st %26amp; 2nd mortgages for a brand new house immediately after I close?
6.75% is average for 30 years fix loan.
8.675 is high of course, but you don't have down payment, lender wants high rates to compensate.
It is hard to find another lender to give you better rate.
I would stay away from adjustable loans or interests-only, because housing market continues to slump. Adjustable loan is "toxic", which means if rates go up while housing price stays, you will in bad spot.
As for interests-only, mortgage payment consists of two parts: interests and principal. Interests are like rent, which doesn't add to the equity to your house. It simply disappear as your pay it. If you want to use interests only loans, might as well rent, especially during market downturn, because housing price won't appreciate.
Would you consider delaying your plan? As housing market continues to slump, it might save you 10% simply by waiting for a few months. Another way to look at it, you can increase profit by 10% when you are ready to sell it.
http://money.cnn.com/2006/09/08/real_est...
http://money.cnn.com/2006/09/05/real_est...
If you want to go ahead with your plan, threaten to back out, they probably will give you incentives without asking you to use their lender.
Good luck!
Would you consider dela
Reply:it can be done but i would take a serious look at the builders morgage contract, you will have to pay the closing cost again an the penalty for refienancing that early alot of morgages has a 5 year penalty. you might be better off keeping the builder morgage see what the long term cost will be on both morgages but add in the cost on the new morgage closing an penalites, an see which is cheaper in the long run
Reply:Assuming you have done 100% financing on this property it might be best for you to keep the current loans. Lenders will charge higher rates for 100% or (80/20) financing options. Also you would only be allowed to use the purchase price as the value so if you did 100% financing you would have to pay the closing costs out of pocket since you would not be able to realize any appreciation on the property. Which for the combined loan amounts you have could be a good deal of money.
However it doesn't hurt to inquire about a refinance. Find out what the new rates and payments could be and compare them to your current situation. If you can recoup the out of pocket closing costs with the monthly savings within 2-3 years then it is worth it. Outside of that you need to ask yourself how long you will have either the house or the current loans because if you plan on selling of refinancing within the next 3-4 years then stay with the current situation you would be spending additional money that you wouldn't need to.
Reply:You can refinance any time you like. Do make sure there are no pre-pay penalties on your builder mortgage.
Reply:yes this is possible if theres no prepayment penalty.
.5% can add up to quite a bit for such a high price home.
it would be best to shop around.
try http://www.savingslife.com
for some basic info, you can get a few different perspectives from local lenders.
Reply:Yes you can and I highly recommend it as it will save you thousands and thousands of money over time. It's called a rate and term refinance and is done all the time. Keep in mind you will pay closing costs again but over a 30 year term will save you much much more than the closing costs. I would also guess that during the time it took to build you have gained some equity as well. With your credit scores you would have no problem refinancing. I hope this helps you but if you need any help or have any further questions please feel free to email me or visit my website www.dantadgerson.com.
Reply:If you'd like I can take a look at your situation for you. I am a loan consultant and do business in 15 states. The company I work for is called equity consultants. We do business in CA. Our toll-free number is 800-546-9080 Ext 199 ask for me Rob Snodgrass
I'm in the office from 9am-7pm every day. Just remember that we are three hours ahead of you. I can do it for you. Hope to hear from you. here is our website www.equityconsultants.com
Thanks
rob
Reply:Hello,
You absolutely can refinance immediately after you close, but you have to use the right lender..
Mos tlenders out ther erequire that you live in the house for at least 6 months prior to doing a refinance transaction... Others require a full 12 months...
I work with Providential Bancorp, a company that has well over 50 inve3stors we have partnered with to have a home for all borrowers in need...
I have plenty of investors that DO NOT require "seasoning"(being in house for 6-12 months)
These investors WILL allow you to refinance in order to get the mortgage rates down...
With your credit scores, you should easily be able to qualify for lower rates then what you have been given, and i think it makes complete sense to do the refinance...
Mortgage companies will be willing to lower your rate in order to get your business...
What you need to BE 100% SURE OF is that you DON NOT have a pre payment penalty...
You also NEED to work with a lender that has LOW closing costs...
You do not want to use a brokerage firm.. Brokers need to charge costs in order to make a profit from a loan...
My company is a bank, and correspondent lendER... We do not rely on origination fee's, or broker fee's in order to make proifit...
Being we are partnered with many investors, we are paid by our partners to simply add another loan to their portfolio... Our philosiphy is that we know there are hundreds of mortgage companies out there... In order to get your business, we need to give you the lowest rates, and lowest fee's...
Being we dont get paid base don how much fee's we charge, we are sure to offer you the lowest closing cost loan possible...
Its easy for any mortgage company to say this, but let the numbers speak for themselves... If you would like to know more, i would be happy to present you with a Goof Faith Estimate, and you yourself can see exactly what you qualify for, and what it costs in order to get it...
I look forward to speaking with you!
Jason Fry
Licensed Mortgaeg Banker
Providential Bancorp
jasonf@providential.com
312-264-6448
1-800-264-7283 ext. 448
Reply:Yes, YEs, YES! I see this happen all the time and help correct it just as often. You need to make sure that neither of your mortgages carry a prepayment penalty. Most likely the 2nd mortgage has an early closure fee of some kind, but these are often under $500 and thus should not be a deal breaker on your size mortgage. I am nationwide mortgage broker in No. California with 20 years experience and would be happy to run some figures for you. There are many things to consider when choosing your new replacement loans like if the property has appreciated since you signed your purchase contract. You may even be able to combine both of your loans into one mortgage! Please contact me: Steve@SLarson.com or via www.SLarson.com/Contact
Regards,
Steve Larson
florist delivery
I am wondering if I would be able to refinance both mortgages immediately after I close? What do I need to consider? What questions do I need to ask?
Sale Price: $960k
New House in California
Interest Rates for 1st/2nd mortgages: 6.75%/8.675%
Excellent FICO scores - high 700s to low 800s
Is it possible to refinance 1st %26amp; 2nd mortgages for a brand new house immediately after I close?
6.75% is average for 30 years fix loan.
8.675 is high of course, but you don't have down payment, lender wants high rates to compensate.
It is hard to find another lender to give you better rate.
I would stay away from adjustable loans or interests-only, because housing market continues to slump. Adjustable loan is "toxic", which means if rates go up while housing price stays, you will in bad spot.
As for interests-only, mortgage payment consists of two parts: interests and principal. Interests are like rent, which doesn't add to the equity to your house. It simply disappear as your pay it. If you want to use interests only loans, might as well rent, especially during market downturn, because housing price won't appreciate.
Would you consider delaying your plan? As housing market continues to slump, it might save you 10% simply by waiting for a few months. Another way to look at it, you can increase profit by 10% when you are ready to sell it.
http://money.cnn.com/2006/09/08/real_est...
http://money.cnn.com/2006/09/05/real_est...
If you want to go ahead with your plan, threaten to back out, they probably will give you incentives without asking you to use their lender.
Good luck!
Would you consider dela
Reply:it can be done but i would take a serious look at the builders morgage contract, you will have to pay the closing cost again an the penalty for refienancing that early alot of morgages has a 5 year penalty. you might be better off keeping the builder morgage see what the long term cost will be on both morgages but add in the cost on the new morgage closing an penalites, an see which is cheaper in the long run
Reply:Assuming you have done 100% financing on this property it might be best for you to keep the current loans. Lenders will charge higher rates for 100% or (80/20) financing options. Also you would only be allowed to use the purchase price as the value so if you did 100% financing you would have to pay the closing costs out of pocket since you would not be able to realize any appreciation on the property. Which for the combined loan amounts you have could be a good deal of money.
However it doesn't hurt to inquire about a refinance. Find out what the new rates and payments could be and compare them to your current situation. If you can recoup the out of pocket closing costs with the monthly savings within 2-3 years then it is worth it. Outside of that you need to ask yourself how long you will have either the house or the current loans because if you plan on selling of refinancing within the next 3-4 years then stay with the current situation you would be spending additional money that you wouldn't need to.
Reply:You can refinance any time you like. Do make sure there are no pre-pay penalties on your builder mortgage.
Reply:yes this is possible if theres no prepayment penalty.
.5% can add up to quite a bit for such a high price home.
it would be best to shop around.
try http://www.savingslife.com
for some basic info, you can get a few different perspectives from local lenders.
Reply:Yes you can and I highly recommend it as it will save you thousands and thousands of money over time. It's called a rate and term refinance and is done all the time. Keep in mind you will pay closing costs again but over a 30 year term will save you much much more than the closing costs. I would also guess that during the time it took to build you have gained some equity as well. With your credit scores you would have no problem refinancing. I hope this helps you but if you need any help or have any further questions please feel free to email me or visit my website www.dantadgerson.com.
Reply:If you'd like I can take a look at your situation for you. I am a loan consultant and do business in 15 states. The company I work for is called equity consultants. We do business in CA. Our toll-free number is 800-546-9080 Ext 199 ask for me Rob Snodgrass
I'm in the office from 9am-7pm every day. Just remember that we are three hours ahead of you. I can do it for you. Hope to hear from you. here is our website www.equityconsultants.com
Thanks
rob
Reply:Hello,
You absolutely can refinance immediately after you close, but you have to use the right lender..
Mos tlenders out ther erequire that you live in the house for at least 6 months prior to doing a refinance transaction... Others require a full 12 months...
I work with Providential Bancorp, a company that has well over 50 inve3stors we have partnered with to have a home for all borrowers in need...
I have plenty of investors that DO NOT require "seasoning"(being in house for 6-12 months)
These investors WILL allow you to refinance in order to get the mortgage rates down...
With your credit scores, you should easily be able to qualify for lower rates then what you have been given, and i think it makes complete sense to do the refinance...
Mortgage companies will be willing to lower your rate in order to get your business...
What you need to BE 100% SURE OF is that you DON NOT have a pre payment penalty...
You also NEED to work with a lender that has LOW closing costs...
You do not want to use a brokerage firm.. Brokers need to charge costs in order to make a profit from a loan...
My company is a bank, and correspondent lendER... We do not rely on origination fee's, or broker fee's in order to make proifit...
Being we are partnered with many investors, we are paid by our partners to simply add another loan to their portfolio... Our philosiphy is that we know there are hundreds of mortgage companies out there... In order to get your business, we need to give you the lowest rates, and lowest fee's...
Being we dont get paid base don how much fee's we charge, we are sure to offer you the lowest closing cost loan possible...
Its easy for any mortgage company to say this, but let the numbers speak for themselves... If you would like to know more, i would be happy to present you with a Goof Faith Estimate, and you yourself can see exactly what you qualify for, and what it costs in order to get it...
I look forward to speaking with you!
Jason Fry
Licensed Mortgaeg Banker
Providential Bancorp
jasonf@providential.com
312-264-6448
1-800-264-7283 ext. 448
Reply:Yes, YEs, YES! I see this happen all the time and help correct it just as often. You need to make sure that neither of your mortgages carry a prepayment penalty. Most likely the 2nd mortgage has an early closure fee of some kind, but these are often under $500 and thus should not be a deal breaker on your size mortgage. I am nationwide mortgage broker in No. California with 20 years experience and would be happy to run some figures for you. There are many things to consider when choosing your new replacement loans like if the property has appreciated since you signed your purchase contract. You may even be able to combine both of your loans into one mortgage! Please contact me: Steve@SLarson.com or via www.SLarson.com/Contact
Regards,
Steve Larson
florist delivery
Which group spread their big stone culture along the coasts of Western Europe and North Africa?
A. Hebrews
B. Minoans
C. Mycenaeans
D. Megalith builders
Which group spread their big stone culture along the coasts of Western Europe and North Africa?
D. Megalith builders
Reply:C
B. Minoans
C. Mycenaeans
D. Megalith builders
Which group spread their big stone culture along the coasts of Western Europe and North Africa?
D. Megalith builders
Reply:C
History question. thanks?
---This Spanish priest wrote The Destruction of the Indies, a book critical of the Spanish enslavement of native people:
(a)Carib de la Cuzco (b)Bartolome de las Casas (c)Bishop Atahualpa (d)Cabeza de Vaca
---Queen Elizabeth I knighted this English sailer after he had sailed around the world and returned great profits for the investments?
(a)John Hawkins (b)Thomas Cavendish (c)Martin Frobisher (d)Francis Drake
---Which of the early Amerindian civilizations was very wealthy and had a system developed to care for the physically handicapped, the mentally ill, and those suffering from chronic illness?
(a)Mandan (b)Inca (c)Maya (d)Mound Builders
---The Melungeons are an ethnic group that consists of
(a)early English settlers that mixed with Native Americans in the Appalachian Mountains.
(b)mixture of Portuguese sailors, African slaves, and survivors of the Roanoke settlement. (c)Croatoan Indians and Spanish explorers. (d) French settlers and native fur traders.
History question. thanks?
This Spanish priest wrote The Destruction of the Indies, a book critical of the Spanish enslavement of native people:
(b)Bartolome de las Casas
Queen Elizabeth I knighted this English sailer after he had sailed around the world and returned great profits for the investments?
(d)Francis Drake
The Melungeons are an ethnic group that consists of
(a)early English settlers that mixed with Native Americans in the Appalachian Mountains.
(a)Carib de la Cuzco (b)Bartolome de las Casas (c)Bishop Atahualpa (d)Cabeza de Vaca
---Queen Elizabeth I knighted this English sailer after he had sailed around the world and returned great profits for the investments?
(a)John Hawkins (b)Thomas Cavendish (c)Martin Frobisher (d)Francis Drake
---Which of the early Amerindian civilizations was very wealthy and had a system developed to care for the physically handicapped, the mentally ill, and those suffering from chronic illness?
(a)Mandan (b)Inca (c)Maya (d)Mound Builders
---The Melungeons are an ethnic group that consists of
(a)early English settlers that mixed with Native Americans in the Appalachian Mountains.
(b)mixture of Portuguese sailors, African slaves, and survivors of the Roanoke settlement. (c)Croatoan Indians and Spanish explorers. (d) French settlers and native fur traders.
History question. thanks?
This Spanish priest wrote The Destruction of the Indies, a book critical of the Spanish enslavement of native people:
(b)Bartolome de las Casas
Queen Elizabeth I knighted this English sailer after he had sailed around the world and returned great profits for the investments?
(d)Francis Drake
The Melungeons are an ethnic group that consists of
(a)early English settlers that mixed with Native Americans in the Appalachian Mountains.
My husbands wont put him on the payroll so he dont have to pay workmans comp. who can i call?
his boss is a general builder in s.l.c.,utah he will only pay him cash under the table. he shorts his hours , my husband puts in 14 hour days he deserves to get payed every dollar legally ,i needed to know where i could call to make a complaint about his boss . he is getting rich at the expense of my husbands hard work (brick mason) and he just wont let my husband get ahead
My husbands wont put him on the payroll so he dont have to pay workmans comp. who can i call?
US Department of Labor, the state attorney general, your local TV station, local newspaper... any of these.
Reply:You could call the IRS. Remain anonymous and just ask questions.
I wish you luck!
Reply:And why does your husband work for him? This is the USA, and if you dont like the terms of your employment then quit. no one is holding your husband back but himself.
Reply:Department of labor but then again if hes getting paid under the table for that long both can be in trouble.. You do know this is illegal right??
Reply:If your husband is being paid under the table, then your husband is in violation with the United States Government for collecting wages without paying any taxes.
You can call your local Government office and file a complaint against your Husband's Employer, but please be aware that there will also be repercussions to your Husband as well.
My advise to you both is that your Husband "cut his loses" with this Employer and then look for work with another General Contractor/Builder who will put him on the books. I realize that this is easier said than done, but in the long run this will be beneficial for both your Husband and Yourself.
Good Luck with your decision.
Reply:It's not worth it for one. It will cause a rough relationship, as the boss will become angry and resentful. He needs to look elsewhere for work.
Go here: http://www.labor.state.ut.us/ for the labor commission of Utah, but it will only cause trouble...
My husbands wont put him on the payroll so he dont have to pay workmans comp. who can i call?
US Department of Labor, the state attorney general, your local TV station, local newspaper... any of these.
Reply:You could call the IRS. Remain anonymous and just ask questions.
I wish you luck!
Reply:And why does your husband work for him? This is the USA, and if you dont like the terms of your employment then quit. no one is holding your husband back but himself.
Reply:Department of labor but then again if hes getting paid under the table for that long both can be in trouble.. You do know this is illegal right??
Reply:If your husband is being paid under the table, then your husband is in violation with the United States Government for collecting wages without paying any taxes.
You can call your local Government office and file a complaint against your Husband's Employer, but please be aware that there will also be repercussions to your Husband as well.
My advise to you both is that your Husband "cut his loses" with this Employer and then look for work with another General Contractor/Builder who will put him on the books. I realize that this is easier said than done, but in the long run this will be beneficial for both your Husband and Yourself.
Good Luck with your decision.
Reply:It's not worth it for one. It will cause a rough relationship, as the boss will become angry and resentful. He needs to look elsewhere for work.
Go here: http://www.labor.state.ut.us/ for the labor commission of Utah, but it will only cause trouble...
Because of their geographic locations the inhabitants of the Indus River valley most likely traded with which?
A. megalith builders
B. Phoenicians
C. Minoans
D. Sumerians
Because of their geographic locations the inhabitants of the Indus River valley most likely traded with which?
Probably all four in fact; but the location is closest to Sumeria so I guess D is the answer the question-setter is looking for.
Reply:C. Minoans (it has been claimed by the greatest Pakistani and Indian archaeologists!)
wreath
B. Phoenicians
C. Minoans
D. Sumerians
Because of their geographic locations the inhabitants of the Indus River valley most likely traded with which?
Probably all four in fact; but the location is closest to Sumeria so I guess D is the answer the question-setter is looking for.
Reply:C. Minoans (it has been claimed by the greatest Pakistani and Indian archaeologists!)
wreath
How do you get actors and directors in the Movies game?
I am playing The Movies and I was trying to find actors and directors to hire. Is there a way to find actors and directors besides turning janitors, extras, builders, e.t.c. into them?
How do you get actors and directors in the Movies game?
You do have the building for hiring actors and directors set up don't you?
There is a hack somewhere to increase the number of staff you get. Try Googling:
The Movies hacks
How do you get actors and directors in the Movies game?
You do have the building for hiring actors and directors set up don't you?
There is a hack somewhere to increase the number of staff you get. Try Googling:
The Movies hacks
Where do i find free career triaing in detroit?
for adults, age range33-40. builders trade(drywalling) c.a.d
Where do i find free career triaing in detroit?
A couple of technical schools come to mind :
Devry - http://www.devry.edu/programs/overview.j...
ITT Technical Institute - http://www.itt-tech.edu/
Just need monies for these or financial aid.
Good luck!
Where do i find free career triaing in detroit?
A couple of technical schools come to mind :
Devry - http://www.devry.edu/programs/overview.j...
ITT Technical Institute - http://www.itt-tech.edu/
Just need monies for these or financial aid.
Good luck!
Theatre Questions?
Theatre signifies all the following EXCEPT
A) the building where the play is performed. C) the stage and backstage
spaces.
B) the company of players. D) the occupation of acting, directing,
design, etc.
The person who controls and develops the artistic product and
provides it with a unified vision is
A) the builder. B) the director. C) the producer. D) the stage manager.
Which of the following does the director NOT look for in audition?
A) actor's ease at handling the role
B) naturalness of delivery
C) physical, vocal, and emotional suitability for the part
D) history of previous performances
Directed stage actions that are precisely scripted physical
behaviors worked out in blocking are called
A) platforming. B) stage business. C) mimetic motion. D) performance
technique.
Platforms, flats, and drapery are the traditional building blocks of
fixed stage scenery.
A) True B) False
Theatre Questions?
Ricky is correct (as are the first 2 to answer...)
"Theatre" and "Theater" are different-- "er" refers to the building or space, while "re" is the company or the concept.
The builder and producer are not involved with guiding the artisic aspects of the play, and the stage manager carries out the directors will/organizes.
An actor would not be cast on the naturalness of their delivery because they are playing a character, and the other aspects listed are much more influential.
Stage business is the "choreographed" behavior. The others aren't really close in definition.
The pieces listed are fixed stage scenery, as opposed to hand props, which are moved and handled by the actors.
Reply:I have the answers to these questions you have posted, but why does it seem like you have copied and pasted a part of an assignment in as a question? I will gladly assist you in your questoins, but I would like to know why you want these answers. I do not want to give you easy answers to a homeowrk assignment or take home test.
Thankyou.
Reply:I agree with Kurious Kat. There are some questions you really should look up. We do you a disservice by doing your homework for you. These are such basic theatrical questions that it makes it obvious you are a novice. One does not learn by copying but through research. This is one for the old-fashioned method. Go to the library.
Reply:1. B
2. B
3. B
4. B
5. B
Reply:I must respectfully disagree with MK on what a director looks for. I, and all the directors I know, could not care less about the history of previous performances (don't care how someone else did it - I only care how you do it), but we do examine the naturalness of the delivery. I need to believe that this person is this character. If it feel forced and put upon, chances are I will not consider them.
A) the building where the play is performed. C) the stage and backstage
spaces.
B) the company of players. D) the occupation of acting, directing,
design, etc.
The person who controls and develops the artistic product and
provides it with a unified vision is
A) the builder. B) the director. C) the producer. D) the stage manager.
Which of the following does the director NOT look for in audition?
A) actor's ease at handling the role
B) naturalness of delivery
C) physical, vocal, and emotional suitability for the part
D) history of previous performances
Directed stage actions that are precisely scripted physical
behaviors worked out in blocking are called
A) platforming. B) stage business. C) mimetic motion. D) performance
technique.
Platforms, flats, and drapery are the traditional building blocks of
fixed stage scenery.
A) True B) False
Theatre Questions?
Ricky is correct (as are the first 2 to answer...)
"Theatre" and "Theater" are different-- "er" refers to the building or space, while "re" is the company or the concept.
The builder and producer are not involved with guiding the artisic aspects of the play, and the stage manager carries out the directors will/organizes.
An actor would not be cast on the naturalness of their delivery because they are playing a character, and the other aspects listed are much more influential.
Stage business is the "choreographed" behavior. The others aren't really close in definition.
The pieces listed are fixed stage scenery, as opposed to hand props, which are moved and handled by the actors.
Reply:I have the answers to these questions you have posted, but why does it seem like you have copied and pasted a part of an assignment in as a question? I will gladly assist you in your questoins, but I would like to know why you want these answers. I do not want to give you easy answers to a homeowrk assignment or take home test.
Thankyou.
Reply:I agree with Kurious Kat. There are some questions you really should look up. We do you a disservice by doing your homework for you. These are such basic theatrical questions that it makes it obvious you are a novice. One does not learn by copying but through research. This is one for the old-fashioned method. Go to the library.
Reply:1. B
2. B
3. B
4. B
5. B
Reply:I must respectfully disagree with MK on what a director looks for. I, and all the directors I know, could not care less about the history of previous performances (don't care how someone else did it - I only care how you do it), but we do examine the naturalness of the delivery. I need to believe that this person is this character. If it feel forced and put upon, chances are I will not consider them.
Distance between HVAC registers?
What is the minimum distance between 2 A/C registers location on the ceiling? I've a scoffed ceiling, and there are recess cans near the corners. Because of that my builder moved the A/C registers closer - approx. 2 to 2 1/2 feet apart.
I think they are too close, but builder says it is okay. This master bedroom size is 15x17 ft.
Any suggestion is appreciated.
Distance between HVAC registers?
You will not get proper air circulation in the room like that. There is no set distance to keep them apart but the location should be based on proper air circulation not what is convenient for the builder. It sounds like your system may have not been properly designed. For more info, check out the ducts page at www.hvac-for-beginners.com
Reply:Can't see why you would need two registers in a 15 x 17 room but they will work fine at that distance. why did he put them so close together? are they running off the same duct? if they are I don't see the point of having two.
balsam
I think they are too close, but builder says it is okay. This master bedroom size is 15x17 ft.
Any suggestion is appreciated.
Distance between HVAC registers?
You will not get proper air circulation in the room like that. There is no set distance to keep them apart but the location should be based on proper air circulation not what is convenient for the builder. It sounds like your system may have not been properly designed. For more info, check out the ducts page at www.hvac-for-beginners.com
Reply:Can't see why you would need two registers in a 15 x 17 room but they will work fine at that distance. why did he put them so close together? are they running off the same duct? if they are I don't see the point of having two.
balsam
'WHO' IS MY Ford Lincoln Mercury Representative For Western Kentucky?? (FROM: B.O.E. 1977AD)*Jkb?
*P.s.* = "*I am *The 1977Ad "Time Lapse *A.O.C.*" United Nations "Master Builder" who assembled 'THE EARTH,,,' %26amp; =%26gt;%26gt;Everything Manmade(tm.) on sell to the public %26amp; i want '*my unpaid paychecks*' %26amp;;or "my car".. *:A Rep.:* May be able to do both.. :(*"There was *A 25+ Years* "Restriction Timeperiod*:((NOW OVER:!!))"*) :#1
:v:v:(lower info.):v:v:
:(*This is "Out Of Sync" Because of Military Secrecy After *:A Time Lapse:* Emergency of :=: *January 29th, 1977Ad* ('Midnight')*)
:%26gt;%26gt;=%26gt; Also, ...for cars... Please "Exclude" *Prince Charles II of Toyota, Southern Indiana "Tahoma Factory"* until :__after "^I^" am paid *For *A.O.C. 1977Ad*, Because "*I Need "*A New Ferrari(~)*";(%26amp; *A Special (VW) ":*Solid Black*:" *Caterpillar(R.)* Hard Alloy Titanium Type* "Enzo Ferrari"(R.) = 'Unbendable On The Highways'), Authorized From "*^The Royal Armed Forces %26amp; Him^*" 'then'.*":!! = $7.T ("Ins. ??") *From:\\\o///:*Jkb/*2006Ad
"*Have ":You:" Seen *****Yahoo??*****, www.yahoo.com"
'WHO' IS MY Ford Lincoln Mercury Representative For Western Kentucky?? (FROM: B.O.E. 1977AD)*Jkb?
meow
Reply:you are ******* crazy
:v:v:(lower info.):v:v:
:(*This is "Out Of Sync" Because of Military Secrecy After *:A Time Lapse:* Emergency of :=: *January 29th, 1977Ad* ('Midnight')*)
:%26gt;%26gt;=%26gt; Also, ...for cars... Please "Exclude" *Prince Charles II of Toyota, Southern Indiana "Tahoma Factory"* until :__after "^I^" am paid *For *A.O.C. 1977Ad*, Because "*I Need "*A New Ferrari(~)*";(%26amp; *A Special (VW) ":*Solid Black*:" *Caterpillar(R.)* Hard Alloy Titanium Type* "Enzo Ferrari"(R.) = 'Unbendable On The Highways'), Authorized From "*^The Royal Armed Forces %26amp; Him^*" 'then'.*":!! = $7.T ("Ins. ??") *From:\\\o///:*Jkb/*2006Ad
"*Have ":You:" Seen *****Yahoo??*****, www.yahoo.com"
'WHO' IS MY Ford Lincoln Mercury Representative For Western Kentucky?? (FROM: B.O.E. 1977AD)*Jkb?
meow
Reply:you are ******* crazy
Strange question?
A man spends his whole working lfe designing and building the most fabulous of bridges. Then one day he was caught giving another man a bj. What is he? A Bridge builder or a C***su**er?
Strange question?
you are right a verry strange question !!!!!!!!!!!!!!!!!!!!!!
Reply:hamsters
Reply:both
Reply:I don't get it...
Reply:still dont get it
Reply:i cant get over it,the bridge joke.lol
Reply:play it to the bone
Reply:Just wierd,,,
Strange question?
you are right a verry strange question !!!!!!!!!!!!!!!!!!!!!!
Reply:hamsters
Reply:both
Reply:I don't get it...
Reply:still dont get it
Reply:i cant get over it,the bridge joke.lol
Reply:play it to the bone
Reply:Just wierd,,,
Housing association question regarding garden?
Hello I dont know if anyone can advise me but I am am currently living in a overcrowded 3 bedroom house and my local council have nominated me to a Housing agency for a 5 bedroom house.
The house is currently being built but when I went with hubby for a drive round one of the builders who was far from helpful said the house had NO garden.The house is a townhouse but with NO garden???? The land around the house seemed very small but I cant believe they would build a house for 8 people with NO garden. I am in Cambridge and land is expensive but I am so upset.
Are they allowed to have no garden or is this builder guy taking c***?
Thanks all.
Housing association question regarding garden?
Why not? Condos don't have gardens. With a condo, you only own the interior of the unit. The association owns the exterior (walls, landscaping, common areas).
Reply:To get the correct answer you really need to contact the Housing Agency and ask them about the No garden. The unhelpful builder might have misunderstood and told you wrong. I really believe your best bet is to ask the agency. Good Luck
The house is currently being built but when I went with hubby for a drive round one of the builders who was far from helpful said the house had NO garden.The house is a townhouse but with NO garden???? The land around the house seemed very small but I cant believe they would build a house for 8 people with NO garden. I am in Cambridge and land is expensive but I am so upset.
Are they allowed to have no garden or is this builder guy taking c***?
Thanks all.
Housing association question regarding garden?
Why not? Condos don't have gardens. With a condo, you only own the interior of the unit. The association owns the exterior (walls, landscaping, common areas).
Reply:To get the correct answer you really need to contact the Housing Agency and ask them about the No garden. The unhelpful builder might have misunderstood and told you wrong. I really believe your best bet is to ask the agency. Good Luck
Le Centre Pompidou?
Okay, I need to know a few things about it.
1. what is its architectural style?
2. what side of the Rine is it on?
3. it's current purpose?
4. how much does it cost to get in for a day?
5. days and times it's open?
6. when was it built?
7. why is it worth seeing?
8. links for pictures showing the following:
a. location of monument in paris
b. metro map showing station
c. picture of builder and year built
d. nice picture showing style
e. map showing monument on right or left bank
f. map showing arrondissement number
g. picture of monument for current purpose, hours, and days
I really need this for a French project due tomorrow. thanks!
wisteria
1. what is its architectural style?
2. what side of the Rine is it on?
3. it's current purpose?
4. how much does it cost to get in for a day?
5. days and times it's open?
6. when was it built?
7. why is it worth seeing?
8. links for pictures showing the following:
a. location of monument in paris
b. metro map showing station
c. picture of builder and year built
d. nice picture showing style
e. map showing monument on right or left bank
f. map showing arrondissement number
g. picture of monument for current purpose, hours, and days
I really need this for a French project due tomorrow. thanks!
wisteria
Selling our primary residence with a gain of one million dollars total. How can I figure my tax liability?
Total cost is 200,000. We are thinking of a sale price of 1.2 million. Live in Massachusetts. Husband is Sch C self-employed builder. We might buy land and build our next house so can we deduct the materials on the next house in this year too, giving a net loss?
Selling our primary residence with a gain of one million dollars total. How can I figure my tax liability?
Assuming the figures you gave, your gain is $1 million. You get a $500,000 exclusion if you lived in it as your principal residence for 2 of the 5 years prior to the sale. In that case, you'd have a taxable gain of $500,000. This would be treated as a long-term capital gain and would generally be taxed at 15%, though there are occasional exceptions to that.
The fact that you are buying or building a new home is a totally separate issue and has no impact on the tax on the gain on the sale of your residence. The cost of the land and construction materials would figure into the basis for the new home but have nothing to do with the sale of your current home what so ever.
The two respondents who mentioned rolling over the gain into your new home are 10 years out of date. Ignore them. The old Rollover Replacement Rule was replaced with the current exclusion in 1997 if memory serves correctly. It was only a deferral on the taxation of the gain. The current rule is a full-fledged exclusion from tax that you can exercise once every 2 years.
The other comment is from someone who doesn't realize that there are a fair number of us here who DO know what we're talking about. If you follow up what I've posted here with the IRS you'll discover that it's correct information. Specifically, get a copy of IRS Pub 523 http://www.irs.gov/pub/irs-pdf/p523.pdf and all will be revealed to you.
Reply:Uncle Sugar will grab $75,000 and you'll keep the rest. That gives you a net tax rate of 7.5%. Who says US taxes are too high?! TFTP Report It
Reply:i would not risk such an issue on here with people who may not be very familiar with the laws in your state..instead contact your CPA and get the right answers the first time..better to be safe then sorry
Reply:Bostonian is, as usual, correct. As long as both you and your husband lived in the house as your principal residence for a total of two of the last five years, you will both qualify for the "Section 121" exclusion. $250,000 for you and $250,000 for your husband for a total of a $500,000 exclusion. Therefore, for a total gain of $1,000,000, your total taxable gain will be $500,000.
Because Section 121 is an exclusion provision and not a postponement of gain provision, the basis for the new residence will be its cost.
While it is possible for you to handle the tax consequences of this yourself, with the amount of money involved I recommend you consult a competent tax specialist.
Good luck,
Reply:Donald C is referring to old rules that have been gone for many years, so his comments are not correct.
If you lived in your house as your primary residence for at least two of the five years immediately preceding the sale, and owned it for at least two of those same five years, you'll be able to exclude $500K of the gain if you file a joint return. You'll also be able to subtract the cost of any improvements you made, and selling costs like realtor's commissions. Whatever's left of the $1,000,000 will show as a taxable capital gain.
It doesn't matter what you do with the proceeds, so there's no deduction for any costs for the next house.
Reply:Invest every bit back into next house and you have no tax liaibility.
Reply:If you roll the proceeds into a new home you can avoid the potential liability. Of course, check with your CPA.. Good problem to have, congrats.
Selling our primary residence with a gain of one million dollars total. How can I figure my tax liability?
Assuming the figures you gave, your gain is $1 million. You get a $500,000 exclusion if you lived in it as your principal residence for 2 of the 5 years prior to the sale. In that case, you'd have a taxable gain of $500,000. This would be treated as a long-term capital gain and would generally be taxed at 15%, though there are occasional exceptions to that.
The fact that you are buying or building a new home is a totally separate issue and has no impact on the tax on the gain on the sale of your residence. The cost of the land and construction materials would figure into the basis for the new home but have nothing to do with the sale of your current home what so ever.
The two respondents who mentioned rolling over the gain into your new home are 10 years out of date. Ignore them. The old Rollover Replacement Rule was replaced with the current exclusion in 1997 if memory serves correctly. It was only a deferral on the taxation of the gain. The current rule is a full-fledged exclusion from tax that you can exercise once every 2 years.
The other comment is from someone who doesn't realize that there are a fair number of us here who DO know what we're talking about. If you follow up what I've posted here with the IRS you'll discover that it's correct information. Specifically, get a copy of IRS Pub 523 http://www.irs.gov/pub/irs-pdf/p523.pdf and all will be revealed to you.
Reply:Uncle Sugar will grab $75,000 and you'll keep the rest. That gives you a net tax rate of 7.5%. Who says US taxes are too high?! TFTP Report It
Reply:i would not risk such an issue on here with people who may not be very familiar with the laws in your state..instead contact your CPA and get the right answers the first time..better to be safe then sorry
Reply:Bostonian is, as usual, correct. As long as both you and your husband lived in the house as your principal residence for a total of two of the last five years, you will both qualify for the "Section 121" exclusion. $250,000 for you and $250,000 for your husband for a total of a $500,000 exclusion. Therefore, for a total gain of $1,000,000, your total taxable gain will be $500,000.
Because Section 121 is an exclusion provision and not a postponement of gain provision, the basis for the new residence will be its cost.
While it is possible for you to handle the tax consequences of this yourself, with the amount of money involved I recommend you consult a competent tax specialist.
Good luck,
Reply:Donald C is referring to old rules that have been gone for many years, so his comments are not correct.
If you lived in your house as your primary residence for at least two of the five years immediately preceding the sale, and owned it for at least two of those same five years, you'll be able to exclude $500K of the gain if you file a joint return. You'll also be able to subtract the cost of any improvements you made, and selling costs like realtor's commissions. Whatever's left of the $1,000,000 will show as a taxable capital gain.
It doesn't matter what you do with the proceeds, so there's no deduction for any costs for the next house.
Reply:Invest every bit back into next house and you have no tax liaibility.
Reply:If you roll the proceeds into a new home you can avoid the potential liability. Of course, check with your CPA.. Good problem to have, congrats.
Question on command and conquer?
hey how do i access the world builder on C%26amp;C generals? i have played the game but i want to make my own map; how do i do that?
is it on zero hour? if so, how do i access the expansion pack? i bought C%26amp;C the first decade but i dunno how to get to zero hour.
Question on command and conquer?
Uh you don't need expansion.
C/ProgramFiles/EA Games/C%26amp;C Generals there is a proggramme called WorldBuilder. Click on that and have fun!
is it on zero hour? if so, how do i access the expansion pack? i bought C%26amp;C the first decade but i dunno how to get to zero hour.
Question on command and conquer?
Uh you don't need expansion.
C/ProgramFiles/EA Games/C%26amp;C Generals there is a proggramme called WorldBuilder. Click on that and have fun!
What of the following names is best for a construction company?
I do residential and commercial work.
A. Art's Construction (my name is Arthur)
B. Sitwell Construction
C. Sitwell Builders
D. Cielo Construction
E. Manifold Construction
F. Encore Construction
and suggest your own.
Thanks
What of the following names is best for a construction company?
Here is n alternative suggestion for naming your consttruction company. I found it on this site and I think its a great idea and involves your friends. Try the link below.
Reply:The Grand Erection Co.
Reply:B. Sitwell construction sounds best to me.
Reply:"Encore Construction" will be fine it will add the proud and strenth to the company .
Reply:I like B and F, but if you already have clientele and are recognized locally you should pick a name that your community will recognize and is self explanatory. since your company is a construction company i would suggest you use that word. All the companies i know that use the word builders are specific to one kind of build like just the house frame or porches.
congrats on the company and good luck with the name picking.
Reply:f encore like do some more
A. Art's Construction (my name is Arthur)
B. Sitwell Construction
C. Sitwell Builders
D. Cielo Construction
E. Manifold Construction
F. Encore Construction
and suggest your own.
Thanks
What of the following names is best for a construction company?
Here is n alternative suggestion for naming your consttruction company. I found it on this site and I think its a great idea and involves your friends. Try the link below.
Reply:The Grand Erection Co.
Reply:B. Sitwell construction sounds best to me.
Reply:"Encore Construction" will be fine it will add the proud and strenth to the company .
Reply:I like B and F, but if you already have clientele and are recognized locally you should pick a name that your community will recognize and is self explanatory. since your company is a construction company i would suggest you use that word. All the companies i know that use the word builders are specific to one kind of build like just the house frame or porches.
congrats on the company and good luck with the name picking.
Reply:f encore like do some more
Which of the following names is best for a construction company?
I do residential and commercial work.
A. Art's Construction (my name is Arthur)
B. Sitwell Construction
C. Sitwell Builders
D. Cielo Construction
E. Manifold Construction
F. Encore Construction
and suggest your own.
Thanks
Which of the following names is best for a construction company?
Encore Construction
Reply:Personally, I don't like any business named for the owner. I used to work for a cleaning company called Lorna's cleaning service. When I opened my own cleaning service, i named my business Maid In Heaven. I like your Sitwell Construction or Sitwell Builders the best.
anemone
A. Art's Construction (my name is Arthur)
B. Sitwell Construction
C. Sitwell Builders
D. Cielo Construction
E. Manifold Construction
F. Encore Construction
and suggest your own.
Thanks
Which of the following names is best for a construction company?
Encore Construction
Reply:Personally, I don't like any business named for the owner. I used to work for a cleaning company called Lorna's cleaning service. When I opened my own cleaning service, i named my business Maid In Heaven. I like your Sitwell Construction or Sitwell Builders the best.
anemone
Tenant farming encouraged the rise of a new class of wealthy?
a)black farmers.
b)merchants.
c)railroad builders.
d)industrialists.
Tenant farming encouraged the rise of a new class of wealthy?
b) merchants
Reply:Drippin on the dizzle down lo' fizzz? I not fluid on the up hole so gimmi some mo' info on the dillio yo!
Reply:Due ur OWN homework!!!!
b)merchants.
c)railroad builders.
d)industrialists.
Tenant farming encouraged the rise of a new class of wealthy?
b) merchants
Reply:Drippin on the dizzle down lo' fizzz? I not fluid on the up hole so gimmi some mo' info on the dillio yo!
Reply:Due ur OWN homework!!!!
What of the following names is best for a construction company?
I do residential and commercial work.
A. Art's Construction (my name is Arthur)
B. Sitwell Construction
C. Sitwell Builders
D. Cielo Construction
E. Manifold Construction
F. Encore Construction
and suggest your own.
Thanks
What of the following names is best for a construction company?
I have run my own building company in the past ( I'm a carpenter and my bro' is a brickie) so I think your name has to reflect which part of the market you're looking to operate in.
If its mainly residential extensions, conservatories, new bathrooms etc then I would suggest something like:
Sitwell Home Improvements
Manifold Property Enhancement Ltd
Cielo General Building Company
If its mainly new build homes from plan or sub-contracting to larger construction then use the word Construction as in your examples.
If you offer a design service then:
Sitwell Design and Build
Sitwell (Concept to Completion) Construct Ltd
Cielo Build to Plan Ltd
Don't forget a company livery and well designed logo really look the part and adds professionalism.
Good Luck!
Reply:How about "Art work Construction?"
Reply:Build it construction
Reply:Arts Erections !
Reply:Reliable Construction
I say that only because I have had a horrible experience
with a construction company in the past.
Good luck with your business
Reply:I like B. It sounds professional, and respectful. Runner up is F. It has a very positive vibe!! 8)
Reply:Art's Erections?
A. Art's Construction (my name is Arthur)
B. Sitwell Construction
C. Sitwell Builders
D. Cielo Construction
E. Manifold Construction
F. Encore Construction
and suggest your own.
Thanks
What of the following names is best for a construction company?
I have run my own building company in the past ( I'm a carpenter and my bro' is a brickie) so I think your name has to reflect which part of the market you're looking to operate in.
If its mainly residential extensions, conservatories, new bathrooms etc then I would suggest something like:
Sitwell Home Improvements
Manifold Property Enhancement Ltd
Cielo General Building Company
If its mainly new build homes from plan or sub-contracting to larger construction then use the word Construction as in your examples.
If you offer a design service then:
Sitwell Design and Build
Sitwell (Concept to Completion) Construct Ltd
Cielo Build to Plan Ltd
Don't forget a company livery and well designed logo really look the part and adds professionalism.
Good Luck!
Reply:How about "Art work Construction?"
Reply:Build it construction
Reply:Arts Erections !
Reply:Reliable Construction
I say that only because I have had a horrible experience
with a construction company in the past.
Good luck with your business
Reply:I like B. It sounds professional, and respectful. Runner up is F. It has a very positive vibe!! 8)
Reply:Art's Erections?
Discrimination Case question?
Thanks the majority of u 4 ur help. I need actual case law for eg Nadia Eweida vs British Airways. If anyone knows any cases that would be of great help. Cutie, by ur answer "u dnt c gay builders" no u couldnt write an essay on it
Discrimination Case question?
you idiot
sort out your grammar!!
Reply:The young Muslim girl who wasn't allowed to wear her religious clothes or the Christian school girl who was not allowed to wear her no sex before marriage ring
Discrimination Case question?
you idiot
sort out your grammar!!
Reply:The young Muslim girl who wasn't allowed to wear her religious clothes or the Christian school girl who was not allowed to wear her no sex before marriage ring
Which probably most influenced the development of Minoan civilization?
A. missionaries from Israel
B. megalith builders
C. trade with Egypt
D. conquest by the Mycenaeans
Which probably most influenced the development of Minoan civilization?
I'll go for for D
Reply:a
Reply:C, when in doubt, C.....I would have said procreation, but that's not a choice, no pun intended.
Reply:Probably "C" trade with Egypt...
cyclamen
B. megalith builders
C. trade with Egypt
D. conquest by the Mycenaeans
Which probably most influenced the development of Minoan civilization?
I'll go for for D
Reply:a
Reply:C, when in doubt, C.....I would have said procreation, but that's not a choice, no pun intended.
Reply:Probably "C" trade with Egypt...
cyclamen
Which group played a part in the exploration of the new western territories?
a. miners
b.factory builders
c. cattle raisers
d. railroad builders
e. trappers
Which group played a part in the exploration of the new western territories?
e-c-d-a-b---ugru
Reply:its trappers, they moved west, looking for new areas to fish and trap, making the expansion of the west.
b.factory builders
c. cattle raisers
d. railroad builders
e. trappers
Which group played a part in the exploration of the new western territories?
e-c-d-a-b---ugru
Reply:its trappers, they moved west, looking for new areas to fish and trap, making the expansion of the west.
Defining words from sentences help please? 10 points to best answer...?
1. Choose the answer that best defines “rendezvous.”
Debra hoped to rendezvous with her parents at the airport’s baggage claim.
a. speak
b. meet
c. rest
d. play
2. Choose the answer that best defines “gauche.”
Owen considered his sister’s decision to wear a red dress to their grandmother’s funeral rather gauche.
a. tasteless
b. fancy
c. boring
d. skillful
3. Choose the answer that best defines “clientele.”
The gallery’s clientele consisted of wealthy collectors and ordinary art lovers.
a. enemies
b. builders
c. offerings
d. customers
4. Choose the answer that best defines “nonchalant.”
The lead character of the action movie always faced dangerous situations with a nonchalant smirk and a witty remark.
a. unconcerned
b. unimpressive
c. unknowable
d. unsophisticated
Defining words from sentences help please? 10 points to best answer...?
1. b
2. a
3. d
4. a
Reply:this is a simple dictionary question, inappropriate for YA
Reply:This isn't a homework assignment, is it?
1. b) / 2. a) / 3. d) / 4. a)
These aren't the 'best' definitions; they're the correct definitions.
Reply:I agree with RK. Do your own homework.
Reply:1. B
2. A
3. D
4. A
u r making us use context clues (learned that in english 1)
Debra hoped to rendezvous with her parents at the airport’s baggage claim.
a. speak
b. meet
c. rest
d. play
2. Choose the answer that best defines “gauche.”
Owen considered his sister’s decision to wear a red dress to their grandmother’s funeral rather gauche.
a. tasteless
b. fancy
c. boring
d. skillful
3. Choose the answer that best defines “clientele.”
The gallery’s clientele consisted of wealthy collectors and ordinary art lovers.
a. enemies
b. builders
c. offerings
d. customers
4. Choose the answer that best defines “nonchalant.”
The lead character of the action movie always faced dangerous situations with a nonchalant smirk and a witty remark.
a. unconcerned
b. unimpressive
c. unknowable
d. unsophisticated
Defining words from sentences help please? 10 points to best answer...?
1. b
2. a
3. d
4. a
Reply:this is a simple dictionary question, inappropriate for YA
Reply:This isn't a homework assignment, is it?
1. b) / 2. a) / 3. d) / 4. a)
These aren't the 'best' definitions; they're the correct definitions.
Reply:I agree with RK. Do your own homework.
Reply:1. B
2. A
3. D
4. A
u r making us use context clues (learned that in english 1)
Whats the quickest way to become petty officer?
By the end of Feb I will E3 and should be an C B Builder. I want be an E4 petty officer as soon as possible, and hopefully go to officers school... but is there any cuts or corners I should know before I take the Petty officer's test.
Whats the quickest way to become petty officer?
Study, study, study. Talk to other petty officers within your rate to see if they have any advice for you. If you are an E3 in February, then I think you'll have to wait until September (possibly even the following March) to take the E4 exam, rather than take it that March.
Good luck!
Reply:you still need your time in grade before you can even take the test for E-4. Check with your LPO and Division Officer if they could give your any suggestions to check points and better evals so you have a better chance. Any extra jobs they want done do them, go the extra mile. Do qual book above your pay grade, its shows them your a team player.
Reply:Become a "Push-Button" E4. I was promoted automatically to E4 after my A School (Fire Controlman), with less than 1 year in the Navy. Made E5 with just over 2 years of service.
Reply:you must have time in Grade before you can take the E4 exam. whether or not you make E4 depends on the final multiple and your score and how many they need to promote each cycle. study the Pubs from top to bottom inside and out and backwards and forwards. make sure you can do PMS in your sleep.
BTW.Officers require a 4 year degree. If you do not have that, you will NOT be going to OCS.
Reply:First off if your gonna be an officer learn how to form a sentence. secound how many years did you sign for if your a seabee Bu then you have the choose to sign for 6 years and you get 3rd when you have done your time. e1-e3. push button crow. if you are the top of your class you get the chance of advancement to 3rd if your and e3. other than that do your time.
Reply:Study real hard. Unless you get high scores on advancement tests, kiss OCS good bye.
Good luck. I had, on average, a lot more respect for the mustangers I knew, than most of those Acadamy creeps I had to deal with.
Reply:If you want BU3 study hard and get your SCW's pin ASAP
Reply:become an officer and do petty things?
Whats the quickest way to become petty officer?
Study, study, study. Talk to other petty officers within your rate to see if they have any advice for you. If you are an E3 in February, then I think you'll have to wait until September (possibly even the following March) to take the E4 exam, rather than take it that March.
Good luck!
Reply:you still need your time in grade before you can even take the test for E-4. Check with your LPO and Division Officer if they could give your any suggestions to check points and better evals so you have a better chance. Any extra jobs they want done do them, go the extra mile. Do qual book above your pay grade, its shows them your a team player.
Reply:Become a "Push-Button" E4. I was promoted automatically to E4 after my A School (Fire Controlman), with less than 1 year in the Navy. Made E5 with just over 2 years of service.
Reply:you must have time in Grade before you can take the E4 exam. whether or not you make E4 depends on the final multiple and your score and how many they need to promote each cycle. study the Pubs from top to bottom inside and out and backwards and forwards. make sure you can do PMS in your sleep.
BTW.Officers require a 4 year degree. If you do not have that, you will NOT be going to OCS.
Reply:First off if your gonna be an officer learn how to form a sentence. secound how many years did you sign for if your a seabee Bu then you have the choose to sign for 6 years and you get 3rd when you have done your time. e1-e3. push button crow. if you are the top of your class you get the chance of advancement to 3rd if your and e3. other than that do your time.
Reply:Study real hard. Unless you get high scores on advancement tests, kiss OCS good bye.
Good luck. I had, on average, a lot more respect for the mustangers I knew, than most of those Acadamy creeps I had to deal with.
Reply:If you want BU3 study hard and get your SCW's pin ASAP
Reply:become an officer and do petty things?
Where can I download file clientdatamoduleu.h?
This file appears to be in C++ Borland Builder version 5. when I try to install it, there is an error message that indicates this file is missing.
Where can I download file clientdatamoduleu.h?
I haven't find this file at google or Yahoo. I suggest that you send an email to borland and request this file if you think that it should have come with the C++ Borland Builder.
http://www.borland.com
wedding floral centerpieces
Where can I download file clientdatamoduleu.h?
I haven't find this file at google or Yahoo. I suggest that you send an email to borland and request this file if you think that it should have come with the C++ Borland Builder.
http://www.borland.com
wedding floral centerpieces
I recently got selected for Standard C Dubai - marketing based profile.. is it worth the sacrifice?
This job involves acquiring more mortgage business to Stand Chat Dubai thru realtors and builders.. They have offered me 6500 Dirams now will i be able to pay for accomadation and food and still save for the future ?? I'm in a fix
I recently got selected for Standard C Dubai - marketing based profile.. is it worth the sacrifice?
Dhs. 6500 is alright.. food is not expensive (if you dont eat out a lot) but however, you might only be able to afford a crappy sharing accomodation. But if you are savvy enough, you can grow in your company or find another job once you get sufficient experience.
I recently got selected for Standard C Dubai - marketing based profile.. is it worth the sacrifice?
Dhs. 6500 is alright.. food is not expensive (if you dont eat out a lot) but however, you might only be able to afford a crappy sharing accomodation. But if you are savvy enough, you can grow in your company or find another job once you get sufficient experience.
Video Game/ Software knowledge on a gamestop application?
VIDEO GAME SYSTEMS ________________________________________...
GAME SOFTWARE KNOWLEDGE ________________________________________...
PC KNOWLEDGE ________________________________________...
thats what it says but i dont know what to put for like software knowledge like do they mean what kind of software is made to use games like maya and motion builder, c++ and stuff i dont know this is my first job
Video Game/ Software knowledge on a gamestop application?
when i filled out my gamestop application i put what systems i know about like i could help out a person who has a question on ps2 and gamecube.
game software i put the big title games i know about like what its content is for parents who are concerned for their kids (how hard is it for these people to follow the ratings if their kids arent of age dont get em the game its that simple)
pc knowledge of course i put nothing cuz i know nothing of computer games and such
so yeah thats what i put
GAME SOFTWARE KNOWLEDGE ________________________________________...
PC KNOWLEDGE ________________________________________...
thats what it says but i dont know what to put for like software knowledge like do they mean what kind of software is made to use games like maya and motion builder, c++ and stuff i dont know this is my first job
Video Game/ Software knowledge on a gamestop application?
when i filled out my gamestop application i put what systems i know about like i could help out a person who has a question on ps2 and gamecube.
game software i put the big title games i know about like what its content is for parents who are concerned for their kids (how hard is it for these people to follow the ratings if their kids arent of age dont get em the game its that simple)
pc knowledge of course i put nothing cuz i know nothing of computer games and such
so yeah thats what i put
Does anybody know how to use CreateFile to send and receive data via teh parallel port in Windows XP?
I'm using borland Builder C++ 5 and i need to send and receive data via parallel port. I know this can be done using CreateFile, but I haven't found any tutorial or anything like that. Can you help me please?
Does anybody know how to use CreateFile to send and receive data via teh parallel port in Windows XP?
Why Borland C++ 5.0. Doesn't that predate XP by like 7 years or more?
BTW: Google is your friend. Google knows all. (see links below).
Does anybody know how to use CreateFile to send and receive data via teh parallel port in Windows XP?
Why Borland C++ 5.0. Doesn't that predate XP by like 7 years or more?
BTW: Google is your friend. Google knows all. (see links below).
How can i make my project executable?
I'm using builder c++. I've finished my project and everything is working well... apparently. I want to make a .exe file so i can run my application on any other computer without having to install builder in it. How do I do this???
How can i make my project executable?
you need to "compile" the source code. This will make it an exe file.
bouquet
How can i make my project executable?
you need to "compile" the source code. This will make it an exe file.
bouquet
How do I display an image in a CERTAIN P(preferably GIF, PNG, or JPG, but BMP will do) in VC6 / C++ using MFC.
I strictly use MFC if I can, VC6 only. I HATE console apps/code with a passion. They are utterly useless. I am so sick of all these tutorials that just 'paste a pic' on a white 'Edit Box' but don't tell you a thing about HOW in the world it got there! PLEASE for all that is decent and holy in the gaming world, please, please help me without mentionint the following words:
cout, cin, console, Linux, Unix, Mac, iMac, IPOD, VB6, .NET, VC7, vc8, Borland, Builder, CDocument, 'make it a memer of the %^%26amp;#$ class' and so on. I just want to know how do I put an image at the location of X, Y, and how do I CHANGE X and Y. I'd like to be abl to have 2 versions of this code, one where I am able to set the movement myself, and another where I can 'click and drag' the graphic (such as a chess piece or checker?) JPGs have great color as GIFs seem splochy, but only GIFs/PNGs have transparency, although I've heard rumours of transparent JPeGs! A versitle code that can use all 3 would be nice.
How do I display an image in a CERTAIN P(preferably GIF, PNG, or JPG, but BMP will do) in VC6 / C++ using MFC.
i tryed to send you a email but some how it did not go through so i am "answering" here. you are very ignorant about macs. i have worked with a lot of pcs both fast and slow, and never had any thing but problems with them. all pcs are junk compared to macs. macs never get viruses, have the best hardware in the world, and have been rated the best computer of any price. they last long, have all good software, pcs have a lot more software but most of it is junk and if you got rid of all the bad stuff there would be less for pc than theere is for mac. i know what a good computer is and you dont. i will never use a pc again. my mac is the best computer i have ever had, and when i need a new computer i will get a mac. PCs STINK.
cout, cin, console, Linux, Unix, Mac, iMac, IPOD, VB6, .NET, VC7, vc8, Borland, Builder, CDocument, 'make it a memer of the %^%26amp;#$ class' and so on. I just want to know how do I put an image at the location of X, Y, and how do I CHANGE X and Y. I'd like to be abl to have 2 versions of this code, one where I am able to set the movement myself, and another where I can 'click and drag' the graphic (such as a chess piece or checker?) JPGs have great color as GIFs seem splochy, but only GIFs/PNGs have transparency, although I've heard rumours of transparent JPeGs! A versitle code that can use all 3 would be nice.
How do I display an image in a CERTAIN P(preferably GIF, PNG, or JPG, but BMP will do) in VC6 / C++ using MFC.
i tryed to send you a email but some how it did not go through so i am "answering" here. you are very ignorant about macs. i have worked with a lot of pcs both fast and slow, and never had any thing but problems with them. all pcs are junk compared to macs. macs never get viruses, have the best hardware in the world, and have been rated the best computer of any price. they last long, have all good software, pcs have a lot more software but most of it is junk and if you got rid of all the bad stuff there would be less for pc than theere is for mac. i know what a good computer is and you dont. i will never use a pc again. my mac is the best computer i have ever had, and when i need a new computer i will get a mac. PCs STINK.
What is the maximum allowable spacing between floor trusses. All of them are 19.2" O.C. but one.?
The builder is moving the truss to the side about a foot to allow plumbing to come through the floor so now that truss spacing is about 30" between them. He is using 3/4" OSB for the floor. Isn't this going to cause a problem? Please give me some good specific references to building code or product specs if you can. Thank you
What is the maximum allowable spacing between floor trusses. All of them are 19.2" O.C. but one.?
Yes that is a problem. You could construct some stringers between the trusses perhaps as a fix. They could be 2 x 4's every 18" perhaps.
I would need more data for a firmer mitigation.
Reply:I would definitely rate it as a problem, and would re-jigger things so that it is not necessary to move the truss. But there is far too little data supplied here to come up with specifics (floor loading? truss span? truss size?), but if you use this data to go into the UBC, you could get the details you need.
Reply:Simply refer to the (referred to) local building codes ... doesn't matter if the structure will hold the desired weight if the building inspector doesn't pass the structure.
The spacing between the trusses is irrelevant to plumbing the structure ... unless, of course, he is using pipes larger than 30" ... once again, the building code will state the minimum and maximum distance between the trusses and between the trusses and the associated plumbing.
Call the city and ask...
What is the maximum allowable spacing between floor trusses. All of them are 19.2" O.C. but one.?
Yes that is a problem. You could construct some stringers between the trusses perhaps as a fix. They could be 2 x 4's every 18" perhaps.
I would need more data for a firmer mitigation.
Reply:I would definitely rate it as a problem, and would re-jigger things so that it is not necessary to move the truss. But there is far too little data supplied here to come up with specifics (floor loading? truss span? truss size?), but if you use this data to go into the UBC, you could get the details you need.
Reply:Simply refer to the (referred to) local building codes ... doesn't matter if the structure will hold the desired weight if the building inspector doesn't pass the structure.
The spacing between the trusses is irrelevant to plumbing the structure ... unless, of course, he is using pipes larger than 30" ... once again, the building code will state the minimum and maximum distance between the trusses and between the trusses and the associated plumbing.
Call the city and ask...
Hydrostatic presszure in basement floor. What is it? My basement floor was sweating, air c was not on?
Basement floor was sweating in spots. Builder said I had hydrostatic pressure. It had not rained in days. I did not have my ari conditioning on all week. I turned on my air because the tempature was in the 90's. My basement is 60 x 12 in the back and 40 x 12 in the front. I feel after the air is on for a few days the sweating will go away.
Hydrostatic presszure in basement floor. What is it? My basement floor was sweating, air c was not on?
It sounds to me like condensation. Get a dehumidifier and make sure your vapor barrier on the basement walls is in good shape. This in a very common situation.
Home builder 32yrs
Reply:You have hydrostatic pressure?? That's like saying there is temperature in your town. Sounds like there's a leak the builder doesn't want to address, but that's just from what little I'm reading here.
Reply:When I pour a concrete slab, under a roof, I trench a spider-like design, and fill with gravel( about 8" deep). Then put a plastic vapor barrier , followed by 6x6 no. 10 wire. The trench allows water to weep out, thus eliminating the "hydro-static" pressure. The plastic helps eliminate the "sweating" from excess moisture. However, if you live in high humidity areas, extreme temp. changes like you describe will always result in some sweating.
Hydrostatic presszure in basement floor. What is it? My basement floor was sweating, air c was not on?
It sounds to me like condensation. Get a dehumidifier and make sure your vapor barrier on the basement walls is in good shape. This in a very common situation.
Home builder 32yrs
Reply:You have hydrostatic pressure?? That's like saying there is temperature in your town. Sounds like there's a leak the builder doesn't want to address, but that's just from what little I'm reading here.
Reply:When I pour a concrete slab, under a roof, I trench a spider-like design, and fill with gravel( about 8" deep). Then put a plastic vapor barrier , followed by 6x6 no. 10 wire. The trench allows water to weep out, thus eliminating the "hydro-static" pressure. The plastic helps eliminate the "sweating" from excess moisture. However, if you live in high humidity areas, extreme temp. changes like you describe will always result in some sweating.
Is registered co-op.hsg.society has the right to issue mortgage N.O.C.to the member in absence of convene done
We have co-op.society at Panvel(old),since there is no any hsg.federation for to guide us in this matter %26amp; the builder is not co operating us,we want answer about it,also want to know legely what we can do in this matter.
Is registered co-op.hsg.society has the right to issue mortgage N.O.C.to the member in absence of convene done
If the cooperative housing society is registered,
the managing committee,if it has been so authorised by the members at a general body meeting,can issue the NOC mentioned by you.
It should be made clear to the member seeking the NOC that it is his responsibility to satisfy the mortgagee about the legality of the
mortgage,preferably in the NOC itself.Also
endorse a copy each to the concerned Registrar of Co-op.Soc.and the Hsg.Federation
at Thane.
gift
Is registered co-op.hsg.society has the right to issue mortgage N.O.C.to the member in absence of convene done
If the cooperative housing society is registered,
the managing committee,if it has been so authorised by the members at a general body meeting,can issue the NOC mentioned by you.
It should be made clear to the member seeking the NOC that it is his responsibility to satisfy the mortgagee about the legality of the
mortgage,preferably in the NOC itself.Also
endorse a copy each to the concerned Registrar of Co-op.Soc.and the Hsg.Federation
at Thane.
gift
How can I learn Cocoa with Objective-C easily without paying for books?
I have Apple's Developer Package which includes Xcode, interface builder etc. I am 14 years old so I am looking for something easy!
How can I learn Cocoa with Objective-C easily without paying for books?
Well if you're worried about payment search for books at the following links.
You'll get them all for free!
http://www.blueportal.org
http://www.ebooksclub.org (needs free registration)
http://www.lookforbook.com
How can I learn Cocoa with Objective-C easily without paying for books?
Well if you're worried about payment search for books at the following links.
You'll get them all for free!
http://www.blueportal.org
http://www.ebooksclub.org (needs free registration)
http://www.lookforbook.com
Info on Bampton Bros Caravans c.1990. Location, models etc.?
I have encountered a caravan made by the above builder, a make I have not previously been aware of, and would be interested to read anything about them. Details such as location of business, dates of production, models produced etc. would be welcomed.
Info on Bampton Bros Caravans c.1990. Location, models etc.?
I must say that although I don't know the answer I admire you for being open about your passion for caravans. It may be a tad on the trainspotter side but good for you.
Have you tried asking the Caravan club - there does not appear to be anything on the internet about this make.
Reply:There is a Bampton for sale on Ebay. Just type "Classic caravan"
Info on Bampton Bros Caravans c.1990. Location, models etc.?
I must say that although I don't know the answer I admire you for being open about your passion for caravans. It may be a tad on the trainspotter side but good for you.
Have you tried asking the Caravan club - there does not appear to be anything on the internet about this make.
Reply:There is a Bampton for sale on Ebay. Just type "Classic caravan"
How to run c++ on my pc ?
i ve installed borland cpp 5.5 builder on my xp sp 2,,, its installed,,, but which is its main exe to run programm ? no shortcuts created on desktop or start menu,,,
How to run c++ on my pc ?
well, it depends on which one you have, like i have turbo c++ 4.5 version, and that can be opened from the start menu, by clicking
on turbo c++.
How to run c++ on my pc ?
well, it depends on which one you have, like i have turbo c++ 4.5 version, and that can be opened from the start menu, by clicking
on turbo c++.
What ton a/c unit should I have for my house?
I have a split entry home and the evening summer sun kills us. Our 1.5 ton unit is obviously too small and can only cool the house down to about 82 degrees. We have about 1450 sq ft upstairs and 300 square foot downstairs. The builder put in the smallest unit he could obviously get away with. Thanks.
What ton a/c unit should I have for my house?
Have you considering using your existing AC downstairs and adding the new one upstairs?
Haven't a clue for size - don't know your location, details of house construction.
Suppose you'll need to find a local that's trustworthy...
Reply:3 ton unit will work fine for a 1750sqft house. Just keep in mind that your furnace needs to be able to handle a 3 ton unit. If it doesn't have enough air flow it will cause problems. If you get to big of a A/C unit it will put to much moisture in your house. Be sure and get a 13 seer unit, this will save you tons of $$$$$s in the long run. I'm not sure how the old the house is, but I sure would call the builder and discuss this with him, and if he doesn't want to correct the problem. turn him in to the BBB, and let him know your're going to do it.
Reply:Just to reinforce some of the other comments: tonnage is estimated by computer program. The program asks questions such as: square footage, how much natural shade is present, which way the windows and doors face (east and west exposure especially), insulation R-factor for walls, floors, and ceiling, etc. This information properly determines what size unit(s) are needed to properly heat and cool your home. But I can tell you what you already know, 1.5 tons is definitely not enough. A professional HVAC contractor can help you correct your problem.
Reply:You need to know more than just the square footage. There are many more factors that must be considered. What you need is called a load calculation. The process uses computer software to model the home to find the size of the equipment. For more info, check out my source.
Reply:Contact a HVAC contractor and they will size the home for you by doing heat/load calculations. Square footage alone is not enought to properly size a a/c to a home.
For a rough guess count the number of heat supplies in the entire house. Four heat supplies equal 1 ton of a/c. So if a house had 12 supplies it should handle a 3 ton a/c.
Reply:You cannot use just the square footage as a guide. There are inspections that need to be done which account for the number of windows and doors in the home. I would say you will be told a 3 ton unit as a guess based on sq. footage.
Reply:Seems like you answered your own question. 1-1/2 ton is definitely not big enough. I would suggest that you contact a local HVAC contractor in your area. Get recommendations if possible from family or neighbors. I just installed a 3-1/2 ton unit in a home about the same size. If you change the unit you will also have to change the A coil to match. Keep in mind also that bigger is not better in A/C cases. If it is too small it will run constantly and too large it will short cycle and kill the unit prematurely. I think a 3 to should do the job but no larger than 3-1/2.
Reply:We also have a west-facing house that lets in too much sun in the afternoon/evening. I'd suggest that you Google "air conditioning" and "ton unit" to get more of an idea of what you need before contacting AC companies; I really couldn't make a good guess.
Another thing I'd recommend, however, is to plant some bushes and trees on that side of the house to provide shade; it makes a bigger difference than many people realize, and reduces the strain on the AC system. Also try shades as window treatments that can be lowered when the sun gets to be too much, or some of the film that can be applied to the windows to block out the UV rays.
garden
What ton a/c unit should I have for my house?
Have you considering using your existing AC downstairs and adding the new one upstairs?
Haven't a clue for size - don't know your location, details of house construction.
Suppose you'll need to find a local that's trustworthy...
Reply:3 ton unit will work fine for a 1750sqft house. Just keep in mind that your furnace needs to be able to handle a 3 ton unit. If it doesn't have enough air flow it will cause problems. If you get to big of a A/C unit it will put to much moisture in your house. Be sure and get a 13 seer unit, this will save you tons of $$$$$s in the long run. I'm not sure how the old the house is, but I sure would call the builder and discuss this with him, and if he doesn't want to correct the problem. turn him in to the BBB, and let him know your're going to do it.
Reply:Just to reinforce some of the other comments: tonnage is estimated by computer program. The program asks questions such as: square footage, how much natural shade is present, which way the windows and doors face (east and west exposure especially), insulation R-factor for walls, floors, and ceiling, etc. This information properly determines what size unit(s) are needed to properly heat and cool your home. But I can tell you what you already know, 1.5 tons is definitely not enough. A professional HVAC contractor can help you correct your problem.
Reply:You need to know more than just the square footage. There are many more factors that must be considered. What you need is called a load calculation. The process uses computer software to model the home to find the size of the equipment. For more info, check out my source.
Reply:Contact a HVAC contractor and they will size the home for you by doing heat/load calculations. Square footage alone is not enought to properly size a a/c to a home.
For a rough guess count the number of heat supplies in the entire house. Four heat supplies equal 1 ton of a/c. So if a house had 12 supplies it should handle a 3 ton a/c.
Reply:You cannot use just the square footage as a guide. There are inspections that need to be done which account for the number of windows and doors in the home. I would say you will be told a 3 ton unit as a guess based on sq. footage.
Reply:Seems like you answered your own question. 1-1/2 ton is definitely not big enough. I would suggest that you contact a local HVAC contractor in your area. Get recommendations if possible from family or neighbors. I just installed a 3-1/2 ton unit in a home about the same size. If you change the unit you will also have to change the A coil to match. Keep in mind also that bigger is not better in A/C cases. If it is too small it will run constantly and too large it will short cycle and kill the unit prematurely. I think a 3 to should do the job but no larger than 3-1/2.
Reply:We also have a west-facing house that lets in too much sun in the afternoon/evening. I'd suggest that you Google "air conditioning" and "ton unit" to get more of an idea of what you need before contacting AC companies; I really couldn't make a good guess.
Another thing I'd recommend, however, is to plant some bushes and trees on that side of the house to provide shade; it makes a bigger difference than many people realize, and reduces the strain on the AC system. Also try shades as window treatments that can be lowered when the sun gets to be too much, or some of the film that can be applied to the windows to block out the UV rays.
garden
Sunday, July 12, 2009
Question in C++??? help soon?
i was searching in the internet i found a tutorial that uses "cstdlib.h" header file they said that it is available in all the compilers i tried on turbo 3.0 and dev cpp builder latest version it doesn't worked they said this header file cannot be found please help me.
Question in C++??? help soon?
you can use stdlib.h
Reply:I tried that, but it still gave me the same errors!
'There is no namespace std'
'Missing identifier: string'
That is not the exact wording, but that is what it meant. Report It
Reply:Prepended header files with 'c' indicate the standardized ruling for using
the C runtime library (standard portions) with C++. Thus time becomes
%26lt;ctime%26gt; instead of %26lt;time.h%26gt;, %26lt;stdio.h%26gt; becomes %26lt;cstdio%26gt;, %26lt;stdlib.h%26gt; becomes
%26lt;cstdlib%26gt;, etc.
Reply:May be that tutorial is wrong. If they said that every version of all compilers has that header, that should be "stdlib.h" not "cstdlib.h".
If is really true try to search on the net what header is actually
Reply:mmmmmmmmmmmmmmmmmm........ i need to review my C++ programming!
Question in C++??? help soon?
you can use stdlib.h
Reply:I tried that, but it still gave me the same errors!
'There is no namespace std'
'Missing identifier: string'
That is not the exact wording, but that is what it meant. Report It
Reply:Prepended header files with 'c' indicate the standardized ruling for using
the C runtime library (standard portions) with C++. Thus time becomes
%26lt;ctime%26gt; instead of %26lt;time.h%26gt;, %26lt;stdio.h%26gt; becomes %26lt;cstdio%26gt;, %26lt;stdlib.h%26gt; becomes
%26lt;cstdlib%26gt;, etc.
Reply:May be that tutorial is wrong. If they said that every version of all compilers has that header, that should be "stdlib.h" not "cstdlib.h".
If is really true try to search on the net what header is actually
Reply:mmmmmmmmmmmmmmmmmm........ i need to review my C++ programming!
The ... is the molecule that carries the amino acids to the ribosome for protein builder?
a)mRNA
b)codon
c)tRNA
d)DNA
The ... is the molecule that carries the amino acids to the ribosome for protein builder?
c) tRNA
Reply:Here's some checks of proof ( Click back then go on http://www.100wgezi.com to get started)
roses
b)codon
c)tRNA
d)DNA
The ... is the molecule that carries the amino acids to the ribosome for protein builder?
c) tRNA
Reply:Here's some checks of proof ( Click back then go on http://www.100wgezi.com to get started)
roses
Want to find site for S.C. labor and licensing Board?
We purchased a home in May to be built. Since then we have found numerous defects in it. The builder fixed a few one morning on June 10th and never came back. We have contacted the agent/contractor and builder by phone and e-mails plus a letter. Neither one will answer the phone calls or e-mails. It has now been 133 days since we moved in.
Want to find site for S.C. labor and licensing Board?
South Carolina Attorney General's office?
Reply:try this link it should help. sorry this has happened to you
Want to find site for S.C. labor and licensing Board?
South Carolina Attorney General's office?
Reply:try this link it should help. sorry this has happened to you
Is it visual C? or just C?
and where would i donwload the builder and compiler from?
Is it visual C? or just C?
Visual C++ is a Microsoft product that provides a nice IDE for developing applications. It can follow standard C++, however, it typically builds code that is only compatible in with the Visual C++ compiler. Microsoft has a free version called Visual C++ Express Edition that can be found at:
http://msdn.microsoft.com/vstudio/expres...
Jeff
http://www.excellentiasoftware.com
Reply:C/C++ is a standard programming language. GNU C (gcc) is a free compiler for it.
Visual C++ is a Microsoft creation. I've never used it, and I couldn't tell you how similar they are.
Is it visual C? or just C?
Visual C++ is a Microsoft product that provides a nice IDE for developing applications. It can follow standard C++, however, it typically builds code that is only compatible in with the Visual C++ compiler. Microsoft has a free version called Visual C++ Express Edition that can be found at:
http://msdn.microsoft.com/vstudio/expres...
Jeff
http://www.excellentiasoftware.com
Reply:C/C++ is a standard programming language. GNU C (gcc) is a free compiler for it.
Visual C++ is a Microsoft creation. I've never used it, and I couldn't tell you how similar they are.
When jet engine manufactrurer Pratt Whitney sells parts to airplan builder Boeing through its web site, this?
is an example of what type of electronic commerce?
A) B2C B) C2C C) B2B D) B2M
When jet engine manufactrurer Pratt Whitney sells parts to airplan builder Boeing through its web site, this?
C) B2B
Becuase Boeing is going to sell this to a carrier/leasing company.
If American Airlines Maintanance was going to buy this part to over-haul an engine it would be B2C.
Reply:c. Business to Business
A) B2C B) C2C C) B2B D) B2M
When jet engine manufactrurer Pratt Whitney sells parts to airplan builder Boeing through its web site, this?
C) B2B
Becuase Boeing is going to sell this to a carrier/leasing company.
If American Airlines Maintanance was going to buy this part to over-haul an engine it would be B2C.
Reply:c. Business to Business
How to rotate spikes in the stage builder option ( in Brawl )????????!!!!?!?!?
I know how to make it go left and right (press left or right on the c-stick), my friends have done it and I played on thier stages where spikes are on all sides, BUT they can't rember what button does it.
P.S. they all think they did it with the gamecube controls.
How to rotate spikes in the stage builder option ( in Brawl )????????!!!!?!?!?
try pressing random buttons and the c-stick in diffrent dierection, trial and error :)
Reply:Try pressing L and R.
online florist
P.S. they all think they did it with the gamecube controls.
How to rotate spikes in the stage builder option ( in Brawl )????????!!!!?!?!?
try pressing random buttons and the c-stick in diffrent dierection, trial and error :)
Reply:Try pressing L and R.
online florist
The man known as the foremost empire builder in Africa was?
A. Leopold III. C. Disraeli.
B. Rhodes. D. Livingstone.
The man known as the foremost empire builder in Africa was?
Cecil John Rhodes 1853-1902 - financier and empire builder of British South Africa. Prime Minister of Cape Colony 1890 - 96, and organizer of the giant diamond-mining company De Beers Consolidated Mines, Ltd. (1880). Rhodesia commemorates his name, later becoming Zimbabwe and Zambia.
Main article: Cecil John Rhodes
financier, statesman, and empire builder of British South Africa. He was prime minister of Cape Colony (1890–96) and organizer of the giant diamond-mining company De Beers Consolidated Mines, Ltd. (1888). By his will he established the Rhodes scholarships at Oxford (1902).
opposition to Kruger
Reply:rhodes
Reply:E) Shaka Zulu
Reply:Cecil John Rhodes. "B".
Reply:i think a
B. Rhodes. D. Livingstone.
The man known as the foremost empire builder in Africa was?
Cecil John Rhodes 1853-1902 - financier and empire builder of British South Africa. Prime Minister of Cape Colony 1890 - 96, and organizer of the giant diamond-mining company De Beers Consolidated Mines, Ltd. (1880). Rhodesia commemorates his name, later becoming Zimbabwe and Zambia.
Main article: Cecil John Rhodes
financier, statesman, and empire builder of British South Africa. He was prime minister of Cape Colony (1890–96) and organizer of the giant diamond-mining company De Beers Consolidated Mines, Ltd. (1888). By his will he established the Rhodes scholarships at Oxford (1902).
opposition to Kruger
Reply:rhodes
Reply:E) Shaka Zulu
Reply:Cecil John Rhodes. "B".
Reply:i think a
Super Smash Bros. Brawl- Stage Builder Parts?
I have unlocked edit parts a, b, and c but i know i still dont have all the parts. In nintendo power, they use big and medium sized blocks to put in their stadiums. also, on super smash bros dojo, it shows a picture of a big spring u get. how do i get these items, or more items in general? are there more items? thx
Super Smash Bros. Brawl- Stage Builder Parts?
You can change the size of the peices (excluding ladder) the button is on the bottom right corner next to the switch around button. so you're not missing any peices the big spring and big and medium size blocks are just different sizes of the block and spring.
Reply:there is no more parts just change the sction your are in
its located on the top tap
if ur using the gamecube controller use L and R to change tabs
Super Smash Bros. Brawl- Stage Builder Parts?
You can change the size of the peices (excluding ladder) the button is on the bottom right corner next to the switch around button. so you're not missing any peices the big spring and big and medium size blocks are just different sizes of the block and spring.
Reply:there is no more parts just change the sction your are in
its located on the top tap
if ur using the gamecube controller use L and R to change tabs
The man known as the foremost empire builder in Africa was?
A: Leopold III
B: Rhodes
C: Disraeli
D: Livingstone
2 question
The Africa nation founded by former Amerian slaves is..
A: Gambia
B: Ivory Coast
C: Gabon
D: Liberia
The man known as the foremost empire builder in Africa was?
Cecil Rhodes, and Liberia
Reply:wat yah think?
Reply:a and d
Reply:D and B
Reply:Listen to wemimo. That respondent has it right. The others are fools. The first answer is Cecil Rhodes. The second is Liberia.
Reply:D for question number 2.
B: Rhodes
C: Disraeli
D: Livingstone
2 question
The Africa nation founded by former Amerian slaves is..
A: Gambia
B: Ivory Coast
C: Gabon
D: Liberia
The man known as the foremost empire builder in Africa was?
Cecil Rhodes, and Liberia
Reply:wat yah think?
Reply:a and d
Reply:D and B
Reply:Listen to wemimo. That respondent has it right. The others are fools. The first answer is Cecil Rhodes. The second is Liberia.
Reply:D for question number 2.
Program Builder help?
I'd like to build a program where it has like a mini window in it that displays a website, how would I make that? Would I have to learn ALL of C++? or just some of it? Cause I'm thinking of making an account creator for MapleStory, I've foudn a site that will help it greatly, and I would like to make a program for automaticly making accounts.
Thanks for the help =)
(If you don't know what I mean, I want a website to be displayed as if it was a window in the program.)
Program Builder help?
Try http://widgets.yahoo.com/ there might be something already made you can customize for the web you want to display.
Also you can sync any web to display on your desktop using windows by going to desktop properties, desktop, customize desktop, web, and set new desktop item then add the url and setup a sync schedule.
floral arrangements
Thanks for the help =)
(If you don't know what I mean, I want a website to be displayed as if it was a window in the program.)
Program Builder help?
Try http://widgets.yahoo.com/ there might be something already made you can customize for the web you want to display.
Also you can sync any web to display on your desktop using windows by going to desktop properties, desktop, customize desktop, web, and set new desktop item then add the url and setup a sync schedule.
floral arrangements
A builder used a strip of metal that was 98 inches long this is the same as?
A 9ft 8 in
B 8ft 6 in
C 8ft 2 in
D 7 ft
A builder used a strip of metal that was 98 inches long this is the same as?
C: There are 12" in a foot, 98/12 = 8.16 therefore, your answer is 8'2"
Reply:c
Reply:almost 8'2"
Reply:c 8ft 2 inches
B 8ft 6 in
C 8ft 2 in
D 7 ft
A builder used a strip of metal that was 98 inches long this is the same as?
C: There are 12" in a foot, 98/12 = 8.16 therefore, your answer is 8'2"
Reply:c
Reply:almost 8'2"
Reply:c 8ft 2 inches
How do I make it so this C++ program won't go into an infinite loop?
I'm not used to using character values in my loops. For some reason it goes a little while. It may not be infinite, I never waited long.
#include %26lt;iostream%26gt;
#include %26lt;fstream%26gt;
using namespace std;
char builder_name[35];
char choice;
void add_builder()
{
while(choice != 'N' || choice != 'n')
{
ofstream builders;
builders.open ("builders.txt", ios::app);
cout %26lt;%26lt; " Enter the name of a builder: ";
cin.get(builder_name, 35);
cin.ignore();
builders %26lt;%26lt; builder_name %26lt;%26lt; endl;
builders.close();
cout %26lt;%26lt; " Would you like to add another builder? (enter (Y) or (N): ";
cin %26gt;%26gt; choice;
};
}
int main ()
{
add_builder();
return 0;
}
How do I make it so this C++ program won't go into an infinite loop?
while(choice != 'N' || choice !='n')
In this line and (%26amp;%26amp;) should be used instead of or(||).
Because if or( || ) is used, atleast one condition will be true for any input (n or N). so loop will go infinite. Hence we should use and(%26amp;%26amp;) to make the loop to terminate for either of the input n or N.
Semicolon should not be used at end of while loop.
Reply:Change the line:
while(choice != 'N' || choice != 'n')
Into:
while(choice != 'N' %26amp;%26amp; choice != 'n')
Reply:Here's your problem - while(choice != 'N' || choice != 'n').
It's that ol' debbil double negative, in a different context. As long as choice isn't both N and n, it loops. If choice ==N, choice !=n is true and vice versa.
#include %26lt;iostream%26gt;
#include %26lt;fstream%26gt;
using namespace std;
char builder_name[35];
char choice;
void add_builder()
{
while(choice != 'N' || choice != 'n')
{
ofstream builders;
builders.open ("builders.txt", ios::app);
cout %26lt;%26lt; " Enter the name of a builder: ";
cin.get(builder_name, 35);
cin.ignore();
builders %26lt;%26lt; builder_name %26lt;%26lt; endl;
builders.close();
cout %26lt;%26lt; " Would you like to add another builder? (enter (Y) or (N): ";
cin %26gt;%26gt; choice;
};
}
int main ()
{
add_builder();
return 0;
}
How do I make it so this C++ program won't go into an infinite loop?
while(choice != 'N' || choice !='n')
In this line and (%26amp;%26amp;) should be used instead of or(||).
Because if or( || ) is used, atleast one condition will be true for any input (n or N). so loop will go infinite. Hence we should use and(%26amp;%26amp;) to make the loop to terminate for either of the input n or N.
Semicolon should not be used at end of while loop.
Reply:Change the line:
while(choice != 'N' || choice != 'n')
Into:
while(choice != 'N' %26amp;%26amp; choice != 'n')
Reply:Here's your problem - while(choice != 'N' || choice != 'n').
It's that ol' debbil double negative, in a different context. As long as choice isn't both N and n, it loops. If choice ==N, choice !=n is true and vice versa.
Subscribe to:
Posts (Atom)